Contents

pgTAP 1.3.3

pgTAP is a unit testing framework for PostgreSQL written in PL/pgSQL and PL/SQL. It includes a comprehensive collection of TAP-emitting assertion functions, as well as the ability to integrate with other TAP-emitting test frameworks. It can also be used in the xUnit testing style.

Synopsis

CREATE EXTENSION IF NOT EXISTS pgtap;

SELECT plan( 23 );
-- or SELECT * from no_plan();

-- Various ways to say "ok"
SELECT ok( :have = :want, :test_description );

SELECT is(   :have, :want, :test_description );
SELECT isnt( :have, :want, :test_description );

-- Rather than \echo # here's what went wrong
SELECT diag( 'here''s what went wrong' );

-- Compare values with LIKE or regular expressions.
SELECT alike(   :have, :like_expression, :test_description );
SELECT unalike( :have, :like_expression, :test_description );

SELECT matches(      :have, :regex, :test_description );
SELECT doesnt_match( :have, :regex, :test_description );

SELECT cmp_ok(:have, '=', :want, :test_description );

-- Skip tests based on runtime conditions.
SELECT CASE WHEN :some_feature THEN collect_tap(
    ok( foo(),       :test_description),
    is( foo(42), 23, :test_description)
) ELSE skip(:why, :how_many ) END;

-- Mark some tests as to-do tests.
SELECT todo(:why, :how_many);
SELECT ok( foo(),       :test_description);
SELECT is( foo(42), 23, :test_description);

-- Simple pass/fail.
SELECT pass(:test_description);
SELECT fail(:test_description);

Installation

pgTAP must be installed on a host with PostgreSQL server running; it cannot be installed remotely. If you're using PostgreSQL in Docker, you need to install pgTAP inside the Docker container.

If you are using Linux, you may (depending on your distribution) be able to use you distribution's package management system to install pgTAP. For instance, on Debian, Ubuntu, or Linux Mint pgTAP can be installed with the command:

sudo apt-get install pgtap

On other systems pgTAP has to be downloaded and built. First, download pgTAP from PGXN (click the green download button in the upper-right). Extract the downloaded zip file, and (at the command line) navigate to the extracted folder.

To build pgTAP and install it into a PostgreSQL database, run the following commands:

make
make install
make installcheck

Potential Issues

If you encounter an error such as:

"Makefile", line 8: Need an operator

You need to use GNU make, which may well be installed on your system as gmake:

gmake
gmake install
gmake installcheck

If you encounter an error such as:

make: pg_config: Command not found

Or:

Makefile:52: *** pgTAP requires PostgreSQL 9.1 or later. This is .  Stop.

Be sure that you have pg_config installed and in your path. If you used a package management system such as RPM to install PostgreSQL, be sure that the -devel package is also installed. If necessary tell the build process where to find it:

env PG_CONFIG=/path/to/pg_config make && make install && make installcheck

And finally, if all that fails, copy the entire distribution directory to the contrib/ subdirectory of the PostgreSQL source tree and try it there without pg_config:

env NO_PGXS=1 make && make install && make installcheck

If you encounter an error such as:

ERROR:  must be owner of database regression

You need to run the test suite using a super user, such as the default "postgres" super user:

make installcheck PGUSER=postgres

If you encounter an error such as:

ERROR: Missing extensions required for testing: citext isn ltree

Install the PostgreSQL Additional Supplied Modules, which are required to run the tests. If you used a package management system such as RPM to install PostgreSQL, install the -contrib package.

Once pgTAP is installed, you can add it to a database by connecting as a super user and running:

CREATE EXTENSION pgtap;

If you've upgraded your cluster to PostgreSQL 9.1 and already had pgTAP installed, you can upgrade it to a properly packaged extension with:

CREATE EXTENSION pgtap FROM unpackaged;

If you want to install pgTAP and all of its supporting objects into a specific schema, use the PGOPTIONS environment variable to specify the schema, like so:

PGOPTIONS=--search_path=tap psql -d mydb -f pgTAP.sql

If you want to install pgTAP and all of its supporting objects into a specific schema, use the SCHEMA clause to specify the schema, like so:

CREATE EXTENSION pgtap SCHEMA tap;

Testing pgTAP with pgTAP

In addition to the PostgreSQL-standard installcheck target, the test target uses the pg_prove Perl program to do its testing, which needs to be installed separately from TAP::Parser::SourceHandler::pgTAP CPAN distribution. You'll need to make sure that you use a database with PL/pgSQL loaded, or else the tests won't work. pg_prove supports a number of environment variables that you might need to use, including all the usual PostgreSQL client environment variables:

  • $PGDATABASE
  • $PGHOST
  • $PGPORT
  • $PGUSER

You can use it to run the test suite as a database super user like so:

make test PGUSER=postgres

To run the tests in a local docker environment using the latest version of PostgreSQL, run:

cd test
docker compose build test
# start the postgres server in a docker container in the background
docker compose up -d test
# run the regression tests
docker compose exec test make install installcheck
# run the tests with pg_prove
# "run" builds and installs pgTAP, runs "CREATE EXTENSION"
# and then runs make test
docker compose exec test run
# Shut down the postgres container
docker compose down

To test with a different version of PostgreSQL, set the environment variable $pgtag to one of the PostgreSQL Docker tags:

export pgtag=12-alpine

Then run the above commands.

Adding pgTAP to a Database

Once pgTAP is installed, you can add it to a database. If you're running PostgreSQL 9.1.0 or greater, it's a simple as connecting to a database as a super user and running:

CREATE EXTENSION IF NOT EXISTS pgtap;

If you've upgraded your cluster to PostgreSQL 9.1 and already had pgTAP installed, you can upgrade it to a properly packaged extension with:

CREATE EXTENSION pgtap FROM unpackaged;

If you want pgTAP to be available to all new databases, install it into the "template1" database:

psql -d template1 -C "CREATE EXTENSION pgtap"

To uninstall pgTAP, use DROP EXTENSION:

DROP EXTENSION IF EXISTS pgtap;

For versions of PostgreSQL less than 9.1.0, you'll need to run the installation script:

psql -d mydb -f /path/to/pgsql/share/contrib/pgtap.sql

If you want to install pgTAP and all of its supporting objects into a specific schema, use the PGOPTIONS environment variable to specify the schema, like so:

PGOPTIONS=--search_path=tap psql -d mydb -f pgTAP.sql

If you want to remove pgTAP from a database, run the uninstall_pgtap.sql script:

psql -d dbname -f uninstall_pgtap.sql

Both scripts will also be installed in the contrib directory under the directory output by pg_config --sharedir. So you can always do this:

psql -d template1 -f `pg_config --sharedir`/contrib/pgtap.sql

But do be aware that, if you've specified a schema using $TAPSCHEMA, that schema will always be created and the pgTAP functions placed in it.

pgTAP Test Scripts

You can distribute pgtap.sql with any PostgreSQL distribution, such as a custom data type. For such a case, if your users want to run your test suite using PostgreSQL's standard installcheck make target, just be sure to set variables to keep the tests quiet, start a transaction, load the functions in your test script, and then rollback the transaction at the end of the script. Here's an example:

\unset ECHO
\set QUIET 1
-- Turn off echo and keep things quiet.

-- Format the output for nice TAP.
\pset format unaligned
\pset tuples_only true
\pset pager off

-- Revert all changes on failure.
\set ON_ERROR_ROLLBACK 1
\set ON_ERROR_STOP true

-- Load the TAP functions.
BEGIN;
\i pgtap.sql

-- Plan the tests.
SELECT plan(1);

-- Run the tests.
SELECT pass( 'My test passed, w00t!' );

-- Finish the tests and clean up.
SELECT * FROM finish();
ROLLBACK;

Now you're ready to run your test script!

% psql -d try -Xf test.sql
1..1
ok 1 - My test passed, w00t!

You'll need to have all of those variables in the script to ensure that the output is proper TAP and that all changes are rolled back -- including the loading of the test functions -- in the event of an uncaught exception.

Using pg_prove

Or save yourself some effort -- and run a batch of tests scripts or all of your xUnit test functions at once -- by using pg_prove, available in the TAP::Parser::SourceHandler::pgTAP CPAN distribution. If you're not relying on installcheck, your test scripts can be a lot less verbose; you don't need to set all the extra variables, because pg_prove takes care of that for you:

-- Start transaction and plan the tests.
BEGIN;
SELECT plan(1);

-- Run the tests.
SELECT pass( 'My test passed, w00t!' );

-- Finish the tests and clean up.
SELECT * FROM finish();
ROLLBACK;

Now run the tests. Here's what it looks like when the pgTAP tests are run with pg_prove:

% pg_prove -U postgres sql/*.sql
sql/coltap.....ok
sql/hastap.....ok
sql/moretap....ok
sql/pg73.......ok
sql/pktap......ok
All tests successful.
Files=5, Tests=216,  1 wallclock secs ( 0.06 usr  0.02 sys +  0.08 cusr  0.07 csys =  0.23 CPU)
Result: PASS

If you're using xUnit tests and just want to have pg_prove run them all through the runtests() function, just tell it to do so:

% pg_prove -d myapp --runtests

Yep, that's all there is to it. Call pg_prove --verbose to see the individual test descriptions, pg_prove --help to see other supported options, and pg_prove --man to see its entire documentation.

Using pgTAP

The purpose of pgTAP is to provide a wide range of testing utilities that output TAP. TAP, or the "Test Anything Protocol", is a standard for representing the output from unit tests. It owes its success to its format as a simple text-based interface that allows for practical machine parsing and high legibility for humans. TAP started life as part of the test harness for Perl but now has implementations in C/C++, Python, PHP, JavaScript, Perl, and, of course, PostgreSQL.

There are two ways to use pgTAP: 1) In simple test scripts that use a plan to describe the tests in the script; or 2) In xUnit-style test functions that you install into your database and run all at once in the PostgreSQL client of your choice.

I love it when a plan comes together

Before anything else, you need a testing plan. This basically declares how many tests your script is going to run to protect against premature failure.

The preferred way to do this is to declare a plan by calling the plan() function:

SELECT plan(42);

There are rare cases when you will not know beforehand how many tests your script is going to run. In this case, you can declare that you have no plan. (Try to avoid using this as it weakens your test.)

SELECT * FROM no_plan();

Often, though, you'll be able to calculate the number of tests, like so:

SELECT plan( COUNT(*) )
  FROM foo;

At the end of your script, you should always tell pgTAP that the tests have completed, so that it can output any diagnostics about failures or a discrepancy between the planned number of tests and the number actually run:

SELECT * FROM finish();

If you need to throw an exception if some test failed, you can pass an option to finish().

SELECT * FROM finish(true);

What a sweet unit!

If you're used to xUnit testing frameworks, you can collect all of your tests into database functions and run them all at once with runtests(). The runtests() function does all the work of finding and running your test functions in individual transactions. It even supports setup and teardown functions. To use it, write your unit test functions so that they return a set of text results, and then use the pgTAP assertion functions to return TAP values. Here's an example, testing a hypothetical users table:

CREATE OR REPLACE FUNCTION setup_insert(
) RETURNS SETOF TEXT AS $$
BEGIN
    RETURN NEXT is( MAX(nick), NULL, 'Should have no users') FROM users;
    INSERT INTO users (nick) VALUES ('theory');
END;
$$ LANGUAGE plpgsql;

CREATE OR REPLACE FUNCTION test_user(
) RETURNS SETOF TEXT AS $$
   SELECT is( nick, 'theory', 'Should have nick') FROM users;
$$ LANGUAGE sql;

See below for details on the pgTAP assertion functions. Once you've defined your unit testing functions, you can run your tests at any time using the runtests() function:

SELECT * FROM runtests();

Each test function will run within its own transaction, and rolled back when the function completes (or after any teardown functions have run). The TAP results will be sent to your client.

Test Descriptions

By convention, each test is assigned a number in order. This is largely done automatically for you. However, it's often very useful to describe each test. Would you rather see this?

  ok 4
  not ok 5
  ok 6

Or this?

  ok 4 - basic multi-variable
  not ok 5 - simple exponential
  ok 6 - force == mass * acceleration

The latter gives you some idea of what failed. It also makes it easier to find the test in your script, simply search for "simple exponential".

All test functions take a description argument. It's optional, but highly suggested that you use it.

xUnit Function Names

Sometimes it's useful to extract xUnit test function names from TAP output, especially when using xUnit style with Continuous Integration Server like Hudson or TeamCity. By default pgTAP displays these names as comments, but you're able to change this behavior by overriding the function diag_test_name. For example:

CREATE OR REPLACE FUNCTION diag_test_name(TEXT)
RETURNS TEXT AS $$
    SELECT diag('test: ' || $1 );
$$ LANGUAGE SQL;

This will show

# test: my_example_test_function_name

instead of

# my_example_test_function_name()

This simplifies parsing test names from TAP comments.

I'm ok, you're not ok

The basic purpose of pgTAP---and of any TAP-emitting test framework, for that matter---is to print out either "ok #" or "not ok #", depending on whether a given test succeeded or failed. Everything else is just gravy.

All of the following functions return "ok" or "not ok" depending on whether the test succeeded or failed.

ok()

SELECT ok( :boolean, :description );
SELECT ok( :boolean );

Parameters

:boolean
A boolean value indicating success or failure.
:description
A short description of the test.

This function simply evaluates any boolean expression and uses it to determine if the test succeeded or failed. A true expression passes, a false one fails. Very simple.

For example:

SELECT ok( 9 ^ 2 = 81,    'simple exponential' );
SELECT ok( 9 < 10,        'simple comparison' );
SELECT ok( 'foo' ~ '^f',  'simple regex' );
SELECT ok( active = true, name ||  widget active' )
  FROM widgets;

(Mnemonic: "This is ok.")

The :description is a very short description of the test that will be printed out. It makes it very easy to find a test in your script when it fails and gives others an idea of your intentions. The description is optional, but we very strongly encourage its use.

Should an ok() fail, it will produce some diagnostics:

not ok 18 - sufficient mucus
#     Failed test 18: "sufficient mucus"

Furthermore, should the boolean test result argument be passed as a NULL rather than true or false, ok() will assume a test failure and attach an additional diagnostic:

not ok 18 - sufficient mucus
#     Failed test 18: "sufficient mucus"
#     (test result was NULL)

is()

isnt()

SELECT is(   :have, :want, :description );
SELECT is(   :have, :want );
SELECT isnt( :have, :want, :description );
SELECT isnt( :have, :want );

Parameters

:have
Value to test.
:want
Value that :have is expected to be. Must be the same data type.
:description
A short description of the test.

Similar to ok(), is() and isnt() compare their two arguments with IS NOT DISTINCT FROM (=) AND IS DISTINCT FROM (<>) respectively and use the result of that to determine if the test succeeded or failed. So these:

-- Is the ultimate answer 42?
SELECT is( ultimate_answer(), 42, 'Meaning of Life' );

-- foo() doesn't return empty
SELECT isnt( foo(), '', 'Got some foo' );

are similar to these:

SELECT ok( ultimate_answer() =  42, 'Meaning of Life' );
SELECT ok( foo() <> '', 'Got some foo' );

(Mnemonic: "This is that." "This isn't that.")

Note: Thanks to the use of the IS [ NOT ] DISTINCT FROM construct, NULLs are not treated as unknowns by is() or isnt(). That is, if :have and :want are both NULL, the test will pass, and if only one of them is NULL, the test will fail.

So why use these test functions? They produce better diagnostics on failure. ok() cannot know what you are testing for (beyond the description), but is() and isnt() know what the test was and why it failed. For example this test:

\set foo '\'waffle\''
\set bar '\'yarblokos\''
SELECT is( :foo::text, :bar::text, 'Is foo the same as bar?' );

Will produce something like this:

# Failed test 17:  "Is foo the same as bar?"
#         have: waffle
#         want: yarblokos

So you can figure out what went wrong without re-running the test.

You are encouraged to use is() and isnt() over ok() where possible. You can even use them to compare records:

SELECT is( users.*, ROW(1, 'theory', true)::users )
  FROM users
 WHERE nick = 'theory';

matches()

SELECT matches( :have, :regex, :description );
SELECT matches( :have, :regex );

Parameters

:have
Value to match.
:regex
A regular expression.
:description
A short description of the test.

Similar to ok(), matches() matches :have against the regex :regex.

So this:

SELECT matches( :this, '^that', 'this is like that' );

is similar to:

SELECT ok( :this ~ '^that', 'this is like that' );

(Mnemonic "This matches that".)

Its advantages over ok() are similar to that of is() and isnt(): Better diagnostics on failure.

imatches()

SELECT imatches( :have, :regex, :description );
SELECT imatches( :have, :regex );

Parameters

:have
Value to match.
:regex
A regular expression.
:description
A short description of the test.

Just like matches() except that the regular expression is compared to :have case-insensitively.

doesnt_match()

doesnt_imatch()

SELECT doesnt_match(  :have, :regex, :description );
SELECT doesnt_match(  :have, :regex );
SELECT doesnt_imatch( :have, :regex, :description );
SELECT doesnt_imatch( :have, :regex );

Parameters

:have
Value to match.
:regex
A regular expression.
:description
A short description of the test.

These functions work exactly as matches() and imatches() do, only they check if :have does not match the given pattern.

alike()

ialike()

SELECT alike(  :this, :like, :description );
SELECT alike(  :this, :like );
SELECT ialike( :this, :like, :description );
SELECT ialike( :this, :like );

Parameters

:have
Value to match.
:like
A SQL LIKE pattern.
:description
A short description of the test.

Similar to matches(), alike() matches :have against the SQL LIKE pattern :like. ialike() matches case-insensitively.

So this:

SELECT ialike( :have, 'that%', 'this is alike that' );

is similar to:

SELECT ok( :have ILIKE 'that%', 'this is like that' );

(Mnemonic "This is like that".)

Its advantages over ok() are similar to that of is() and isnt(): Better diagnostics on failure.

unalike()

unialike()

SELECT unalike(  :this, :like, :description );
SELECT unalike(  :this, :like );
SELECT unialike( :this, :like, :description );
SELECT unialike( :this, :like );

Parameters

:have
Value to match.
:like
A SQL LIKE pattern.
:description
A short description of the test.

Works exactly as alike(), only it checks if :have does not match the given pattern.

cmp_ok()

SELECT cmp_ok( :have, :op, :want, :description );
SELECT cmp_ok( :have, :op, :want );

Parameters

:have
Value to compare.
:op
An SQL operator specified as a string.
:want
Value to compare to :have using the :op operator.
:description
A short description of the test.

Halfway between ok() and is() lies cmp_ok(). This function allows you to compare two arguments using any binary operator.

-- ok( :have = :want );
SELECT cmp_ok( :have, '=', :want, 'this = that' );

-- ok( :have >= :want );
SELECT cmp_ok( :have, '>=', :want, 'this >= that' );

-- ok( :have && :want );
SELECT cmp_ok( :have, '&&', :want, 'this && that' );

Its advantage over ok() is that when the test fails you'll know what :have and :want were:

not ok 1
#     Failed test 1:
#     '23'
#         &&
#     NULL

Note that if the value returned by the operation is NULL, the test will be considered to have failed. This may not be what you expect if your test was, for example:

SELECT cmp_ok( NULL, '=', NULL );

But in that case, you should probably use is(), instead.

pass()

fail()

SELECT pass( :description );
SELECT pass( );
SELECT fail( :description );
SELECT fail( );

Parameters

:description
A short description of the test.

Sometimes you just want to say that the tests have passed. Usually the case is you've got some complicated condition that is difficult to wedge into an ok(). In this case, you can simply use pass() (to declare the test ok) or fail() (for not ok). They are synonyms for ok(1) and ok(0).

Use these functions very, very, very sparingly.

isa_ok()

SELECT isa_ok( :have, :regtype, :name );
SELECT isa_ok( :have, :regtype );

Parameters

:have
Value to check the type of.
:regtype
Name of an SQL data type.
:name
A name for the value being compared.

Checks to see if the given value is of a particular type. The description and diagnostics of this test normally just refer to "the value". If you'd like them to be more specific, you can supply a :name. For example you might say "the return value" when you're examining the result of a function call:

SELECT isa_ok( length('foo'), 'integer', 'The return value from length()' );

In which case the description will be "The return value from length() isa integer".

In the event of a failure, the diagnostic message will tell you what the type of the value actually is:

not ok 12 - the value isa integer[]
#     the value isn't a "integer[]" it's a "boolean"

Pursuing Your Query

Sometimes, you've just gotta test a query. I mean the results of a full blown query, not just the scalar assertion functions we've seen so far. pgTAP provides a number of functions to help you test your queries, each of which takes one or two SQL statements as arguments. For example:

SELECT throws_ok('SELECT divide_by(0)');

Yes, as strings. Of course, you'll often need to do something complex in your SQL, and quoting SQL in strings in what is, after all, an SQL application, is an unnecessary PITA. Each of the query-executing functions in this section thus support an alternative to make your tests more SQLish: using prepared statements.

Prepared statements allow you to just write SQL and simply pass the prepared statement names to test functions. For example, the above example can be rewritten as:

PREPARE mythrow AS SELECT divide_by(0);
SELECT throws_ok('mythrow');

pgTAP assumes that an SQL argument without space characters or starting with a double quote character is a prepared statement and simply EXECUTEs it. If you need to pass arguments to a prepared statement, perhaps because you plan to use it in multiple tests to return different values, just EXECUTE it yourself. Here's an example with a prepared statement with a space in its name, and one where arguments need to be passed:

PREPARE "my test" AS SELECT * FROM active_users() WHERE name LIKE 'A%';
PREPARE expect AS SELECT * FROM users WHERE active = $1 AND name LIKE $2;

SELECT results_eq(
    '"my test"',
    'EXECUTE expect( true, ''A%'' )'
);

Since "my test" was declared with double quotes, it must be passed with double quotes. And since the call to "expect" included spaces (to keep it legible), the EXECUTE keyword was required.

You can also use a VALUES statement, both in the query string or in a prepared statement. A useless example:

PREPARE myvals AS VALUES (1, 2), (3, 4);
SELECT set_eq(
    'myvals',
    'VALUES (1, 2), (3, 4)'
);

Here's a bonus if you need to check the results from a query that returns a single column: for those functions that take two query arguments, the second can be an array. Check it out:

SELECT results_eq(
    'SELECT * FROM active_user_ids()',
    ARRAY[ 2, 3, 4, 5]
);

The first query must return only one column of the same type as the values in the array. If you need to test more columns, you'll need to use two queries.

Keeping these techniques in mind, read on for all of the query-testing goodness.

To Error is Human

Sometimes you just want to know that a particular query will trigger an error. Or maybe you want to make sure a query does not trigger an error. For such cases, we provide a couple of test functions to make sure your queries are as error-prone as you think they should be.

throws_ok()

SELECT throws_ok( :sql, :errcode, :ermsg, :description );
SELECT throws_ok( :sql, :errcode, :ermsg );
SELECT throws_ok( :sql, :errcode );
SELECT throws_ok( :sql, :errmsg, :description );
SELECT throws_ok( :sql, :errmsg );
SELECT throws_ok( :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:errcode
A [PostgreSQL error code](https://www.postgresql.org/docs/current/static/errcodes-appendix.html "Appendix A. PostgreSQL Error Codes")
:errmsg
An error message.
:description
A short description of the test.

When you want to make sure that an exception is thrown by PostgreSQL, use throws_ok() to test for it.

The first argument should be the name of a prepared statement or else a string representing the query to be executed (see the summary for query argument details). throws_ok() will use the PL/pgSQL EXECUTE statement to execute the query and catch any exception.

The second argument should be an exception error code, which is a five-character string (if it happens to consist only of numbers and you pass it as an integer, it will still work). If this value is not NULL, throws_ok() will check the thrown exception to ensure that it is the expected exception. For a complete list of error codes, see [Appendix A.](https://www.postgresql.org/docs/current/static/errcodes-appendix.html "Appendix A. PostgreSQL Error Codes") in the PostgreSQL documentation.

The third argument is an error message. This will be most useful for functions you've written that raise exceptions, so that you can test the exception message that you've thrown. Otherwise, for core errors, you'll need to be careful of localized error messages. One trick to get around localized error messages is to pass NULL as the third argument. This allows you to still pass a description as the fourth argument.

The fourth argument is of course a brief test description. Here's a useful example:

PREPARE my_thrower AS INSERT INTO try (id) VALUES (1);
SELECT throws_ok(
    'my_thrower',
    '23505',
    'duplicate key value violates unique constraint "try_pkey"',
    'We should get a unique violation for a duplicate PK'
);

For the two- and three-argument forms of throws_ok(), if the second argument is exactly five bytes long, it is assumed to be an error code and the optional third argument is the error message. Otherwise, the second argument is assumed to be an error message and the third argument is a description. If for some reason you need to test an error message that is five bytes long, use the four-argument form.

A failing throws_ok() test produces an appropriate diagnostic message. For example:

# Failed test 81: "This should die a glorious death"
#       caught: 23505: duplicate key value violates unique constraint "try_pkey"
#       wanted: 23502: null value in column "id" violates not-null constraint

Idea borrowed from the Test::Exception Perl module.

throws_like()

throws_ilike()

SELECT throws_like(  :sql, :like, :description );
SELECT throws_like(  :sql, :like );
SELECT throws_ilike( :sql, :like, :description );
SELECT throws_ilike( :sql, :like );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:like
An SQL LIKE pattern.
:description
A short description of the test.

Like throws_ok(), but tests that an exception error message matches an SQL LIKE pattern. The throws_ilike() variant matches case-insensitively. An example:

PREPARE my_thrower AS INSERT INTO try (tz) VALUES ('America/Moscow');
SELECT throws_like(
    'my_thrower',
    '%"timezone_check"',
    'We should error for invalid time zone'
);

A failing throws_like() test produces an appropriate diagnostic message. For example:

# Failed test 85: "We should error for invalid time zone"
#     error message: 'value for domain timezone violates check constraint "tz_check"'
#     doesn't match: '%"timezone_check"'

throws_matching()

throws_imatching()

SELECT throws_matching(  :sql, :regex, :description );
SELECT throws_matching(  :sql, :regex );
SELECT throws_imatching( :sql, :regex, :description );
SELECT throws_imatching( :sql, :regex );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:regex
A regular expression.
:description
A short description of the test.

Like throws_ok(), but tests that an exception error message matches a regular expression. The throws_imatching() variant matches case-insensitively. An example:

PREPARE my_thrower AS INSERT INTO try (tz) VALUES ('America/Moscow');
SELECT throws_matching(
    'my_thrower',
    '.+"timezone_check"',
    'We should error for invalid time zone'
);

A failing throws_matching() test produces an appropriate diagnostic message. For example:

# Failed test 85: "We should error for invalid time zone"
#     error message: 'value for domain timezone violates check constraint "tz_check"'
#     doesn't match: '.+"timezone_check"'

lives_ok()

SELECT lives_ok( :sql, :description );
SELECT lives_ok( :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

The inverse of throws_ok(), lives_ok() ensures that an SQL statement does not throw an exception. Pass in the name of a prepared statement or string of SQL code (see the summary for query argument details). The optional second argument is the test description. An example:

SELECT lives_ok(
    'INSERT INTO try (id) VALUES (1)',
    'We should not get a unique violation for a new PK'
);

A failing lives_ok() test produces an appropriate diagnostic message. For example:

# Failed test 85: "don't die, little buddy!"
#         died: 23505: duplicate key value violates unique constraint "try_pkey"

Idea borrowed from the Test::Exception Perl module.

performs_ok()

SELECT performs_ok( :sql, :milliseconds, :description );
SELECT performs_ok( :sql, :milliseconds );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:milliseconds
Number of milliseconds.
:description
A short description of the test.

This function makes sure that an SQL statement performs well. It does so by timing its execution and failing if execution takes longer than the specified number of milliseconds. An example:

PREPARE fast_query AS SELECT id FROM try WHERE name = 'Larry';
SELECT performs_ok(
    'fast_query',
    250,
    'A select by name should be fast'
);

The first argument should be the name of a prepared statement or a string representing the query to be executed (see the summary for query argument details). performs_ok() will use the PL/pgSQL EXECUTE statement to execute the query.

The second argument is the maximum number of milliseconds it should take for the SQL statement to execute. This argument is numeric, so you can even use fractions of milliseconds if it floats your boat.

The third argument is the usual description. If not provided, performs_ok() will generate the description "Should run in less than $milliseconds ms". You'll likely want to provide your own description if you have more than a couple of these in a test script or function.

Should a performs_ok() test fail it produces appropriate diagnostic messages. For example:

# Failed test 19: "The lookup should be fast!"
#       runtime: 200.266 ms
#       exceeds: 200 ms

Note: There is a little extra time included in the execution time for the the overhead of PL/pgSQL's EXECUTE, which must compile and execute the SQL string. You will want to account for this and pad your estimates accordingly. It's best to think of this as a brute force comparison of runtimes, in order to ensure that a query is not really slow (think seconds).

performs_within()

SELECT performs_within( :sql, :average_milliseconds, :within, :iterations, :description );
SELECT performs_within( :sql, :average_milliseconds, :within, :description );
SELECT performs_within( :sql, :average_milliseconds, :within, :iterations);
SELECT performs_within( :sql, :average_milliseconds, :within);

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:average_milliseconds
Number of milliseconds the query should take on average.
:within
The number of milliseconds that the average is allowed to vary.
:iterations
The number of times to run the query.
:description
A short description of the test.

This function makes sure that an SQL statement, on average, performs within an expected window. It does so by running the query a default of 10 times. It throws out the top and bottom 10% of runs, and averages the middle 80% of the runs it made. If the average execution time is outside the range specified by within, the test will fails. An example:

PREPARE fast_query AS SELECT id FROM try WHERE name = 'Larry';
SELECT performs_within(
    'fast_query',
    250,
    10,
    100,
    'A select by name should be fast'
);

The first argument should be the name of a prepared statement or a string representing the query to be executed (see the summary for query argument details). performs_within() will use the PL/pgSQL EXECUTE statement to execute the query.

The second argument is the average number of milliseconds it should take for the SQL statement to execute. This argument is numeric, so you can even use fractions of milliseconds if it floats your boat.

The third argument is the number of milliseconds the query is allowed to vary around the average and still still pass the test. If the query's average is falls outside this window, either too fast or too slow, it will fail.

The fourth argument is either the number of iterations or the usual description. If not provided, performs_within() will execute 10 runs of the query and will generate the description "Should run in $average_milliseconds +/- $within ms". You'll likely want to provide your own description if you have more than a couple of these in a test script or function.

The fifth argument is the usual description as described above, assuming you've also specified the number of iterations.

Should a performs_within() test fail it produces appropriate diagnostic messages. For example:

# Failed test 19: "The lookup should be fast!"
# average runtime: 210.266 ms
# desired average: 200 +/- 10 ms

Note: There is a little extra time included in the execution time for the the overhead of PL/pgSQL's EXECUTE, which must compile and execute the SQL string. You will want to account for this and pad your estimates accordingly. It's best to think of this as a brute force comparison of runtimes, in order to ensure that a query is not really slow (think seconds).

Can You Relate?

So you've got your basic scalar comparison functions, what about relations? Maybe you have some pretty hairy SELECT statements in views or functions to test? We've got your relation-testing functions right here.

results_eq()

SELECT results_eq( :sql,    :sql,    :description );
SELECT results_eq( :sql,    :sql                  );
SELECT results_eq( :sql,    :array,  :description );
SELECT results_eq( :sql,    :array                );
SELECT results_eq( :cursor, :cursor, :description );
SELECT results_eq( :cursor, :cursor               );
SELECT results_eq( :sql,    :cursor, :description );
SELECT results_eq( :sql,    :cursor               );
SELECT results_eq( :cursor, :sql,    :description );
SELECT results_eq( :cursor, :sql                  );
SELECT results_eq( :cursor, :array,  :description );
SELECT results_eq( :cursor, :array                );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:array
An array of values representing a single-column row values.
:cursor
A PostgreSQL refcursor value representing a named cursor.
:description
A short description of the test.

There are three ways to test result sets in pgTAP. Perhaps the most intuitive is to do a direct row-by-row comparison of results to ensure that they are exactly what you expect, in the order you expect. Coincidentally, this is exactly how results_eq() behaves. Here's how you use it: simply pass in two SQL statements or prepared statement names (or some combination; (see the summary for query argument details) and an optional description. Yep, that's it. It will do the rest.

For example, say that you have a function, active_users(), that returns a set of rows from the users table. To make sure that it returns the rows you expect, you might do something like this:

SELECT results_eq(
    'SELECT * FROM active_users()',
    'SELECT * FROM users WHERE active',
    'active_users() should return active users'
);

Tip: If you want to hard-code the values to compare, use a VALUES statement instead of a query, like so:

SELECT results_eq(
    'SELECT * FROM active_users()',
    $$VALUES ( 42, 'Anna'), (19, 'Strongrrl'), (39, 'Theory')$$,
    'active_users() should return active users'
);

If the results returned by the first argument consist of a single column, the second argument may be an array:

SELECT results_eq(
    'SELECT * FROM active_user_ids()',
    ARRAY[ 2, 3, 4, 5]
);

In general, the use of prepared statements is highly recommended to keep your test code SQLish (you can even use VALUES in prepared statements). But note that, because results_eq() does a row-by-row comparison, the results of the two query arguments must be in exactly the same order, with exactly the same data types, in order to pass. In practical terms, it means that you must make sure that your results are never unambiguously ordered.

For example, say that you want to compare queries against a persons table. The simplest way to sort is by name, as in:

try=# select * from people order by name;
  name  | age
--------+-----
 Damian |  19
 Larry  |  53
 Tom    |  44
 Tom    |  35
(4 rows)

But a different run of the same query could have the rows in different order:

try=# select * from people order by name;
  name  | age
--------+-----
 Damian |  19
 Larry  |  53
 Tom    |  35
 Tom    |  44
(4 rows)

Notice how the two "Tom" rows are reversed. The upshot is that you must ensure that your queries are always fully ordered. In a case like the above, it means sorting on both the name column and the age column. If the sort order of your results isn't important, consider using set_eq() or bag_eq() instead.

Internally, results_eq() turns your SQL statements into cursors so that it can iterate over them one row at a time. Conveniently, this behavior is directly available to you, too. Rather than pass in some arbitrary SQL statement or the name of a prepared statement, simply create a cursor and pass it in, like so:

DECLARE cwant CURSOR FOR SELECT * FROM active_users();
DECLARE chave CURSOR FOR SELECT * FROM users WHERE active ORDER BY name;

SELECT results_eq(
    'cwant'::refcursor,
    'chave'::refcursor,
    'Gotta have those active users!'
);

The key is to ensure that the cursor names are passed as refcursors. This allows results_eq() to disambiguate them from prepared statements. And of course, you can mix and match cursors, prepared statements, and SQL as much as you like. Here's an example using a prepared statement and a (reset) cursor for the expected results:

PREPARE users_test AS SELECT * FROM active_users();
MOVE BACKWARD ALL IN chave;

SELECT results_eq(
    'users_test',
    'chave'::refcursor,
    'Gotta have those active users!'
);

Regardless of which types of arguments you pass, in the event of a test failure, results_eq() will offer a nice diagnostic message to tell you at what row the results differ, something like:

# Failed test 146
#     Results differ beginning at row 3:
#         have: (1,Anna)
#         want: (22,Betty)

If there are different numbers of rows in each result set, a non-existent row will be represented as "NULL":

# Failed test 147
#     Results differ beginning at row 5:
#         have: (1,Anna)
#         want: NULL

If the number of columns varies between result sets, or if results are of different data types, you'll get diagnostics like so:

# Failed test 148
#     Number of columns or their types differ between the queries:
#         have: (1)
#         want: (foo,1)

results_ne()

SELECT results_ne( :sql,    :sql,    :description );
SELECT results_ne( :sql,    :sql                  );
SELECT results_ne( :sql,    :array,  :description );
SELECT results_ne( :sql,    :array                );
SELECT results_ne( :cursor, :cursor, :description );
SELECT results_ne( :cursor, :cursor               );
SELECT results_ne( :sql,    :cursor, :description );
SELECT results_ne( :sql,    :cursor               );
SELECT results_ne( :cursor, :sql,    :description );
SELECT results_ne( :cursor, :sql                  );
SELECT results_ne( :cursor, :array,  :description );
SELECT results_ne( :cursor, :array                );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:array
An array of values representing a single-column row values.
:cursor
A PostgreSQL refcursor value representing a named cursor.
:description
A short description of the test.

The inverse of results_eq(), this function tests that query results are not equivalent. Note that, like results_ne(), order matters, so you can actually have the same sets of results in the two query arguments and the test will pass if they're merely in a different order. More than likely what you really want is results_eq() or set_ne(). But this function is included for completeness and is kind of cute, so enjoy. If a results_ne() test fails, however, there will be no diagnostics, because, well, the results will be the same!

set_eq()

SELECT set_eq( :sql, :sql,   :description );
SELECT set_eq( :sql, :sql                 );
SELECT set_eq( :sql, :array, :description );
SELECT set_eq( :sql, :array               );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:array
An array of values representing a single-column row values.
:description
A short description of the test.

Sometimes you don't care what order query results are in, or if there are duplicates. In those cases, use set_eq() to do a simple set comparison of your result sets. As long as both queries return the same records, regardless of duplicates or ordering, a set_eq() test will pass.

The SQL arguments can be the names of prepared statements or strings containing an SQL query (see the summary for query argument details), or even one of each. If the results returned by the first argument consist of a single column, the second argument may be an array:

SELECT set_eq(
    'SELECT * FROM active_user_ids()',
    ARRAY[ 2, 3, 4, 5]
);

In whatever case you choose to pass arguments, a failing test will yield useful diagnostics, such as:

# Failed test 146
#     Extra records:
#         (87,Jackson)
#         (1,Jacob)
#     Missing records:
#         (44,Anna)
#         (86,Angelina)

In the event that you somehow pass queries that return rows with different types of columns, pgTAP will tell you that, too:

# Failed test 147
#     Columns differ between queries:
#         have: (integer,text)
#         want: (text,integer)

This of course extends to sets with different numbers of columns:

# Failed test 148
#     Columns differ between queries:
#         have: (integer)
#         want: (text,integer)

set_ne()

SELECT set_ne( :sql, :sql,   :description );
SELECT set_ne( :sql, :sql                 );
SELECT set_ne( :sql, :array, :description );
SELECT set_ne( :sql, :array               );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:array
An array of values representing a single-column row values.
:description
A short description of the test.

The inverse of set_eq(), this function tests that the results of two queries are not the same. The two queries can as usual be the names of prepared statements or strings containing an SQL query (see the summary for query argument details), or even one of each. The two queries, however, must return results that are directly comparable --- that is, with the same number and types of columns in the same orders. If it happens that the query you're testing returns a single column, the second argument may be an array.

set_has()

SELECT set_has( :sql, :sql, :description );
SELECT set_has( :sql, :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

When you need to test that a query returns at least some subset of records, set_has() is the hammer you're looking for. It tests that the the results of a query contain at least the results returned by another query, if not more. That is, the test passes if the second query's results are a subset of the first query's results. The second query can even return an empty set, in which case the test will pass no matter what the first query returns. Not very useful perhaps, but set-theoretically correct.

As with set_eq(). the SQL arguments can be the names of prepared statements or strings containing an SQL query (see the summary for query argument details), or one of each. If it happens that the query you're testing returns a single column, the second argument may be an array.

In whatever case, a failing test will yield useful diagnostics just like:

# Failed test 122
#     Missing records:
#         (44,Anna)
#         (86,Angelina)

As with set_eq(), set_has() will also provide useful diagnostics when the queries return incompatible columns. Internally, it uses an EXCEPT query to determine if there any any unexpectedly missing results.

set_hasnt()

SELECT set_hasnt( :sql, :sql, :description );
SELECT set_hasnt( :sql, :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

This test function is the inverse of set_has(): the test passes when the results of the first query have none of the results of the second query. Diagnostics are similarly useful:

# Failed test 198
#     Extra records:
#         (44,Anna)
#         (86,Angelina)

Internally, the function uses an INTERSECT query to determine if there is any unexpected overlap between the query results.

bag_eq()

SELECT bag_eq( :sql, :sql,   :description );
SELECT bag_eq( :sql, :sql                 );
SELECT bag_eq( :sql, :array, :description );
SELECT bag_eq( :sql, :array               );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:array
An array of values representing a single-column row values.
:description
A short description of the test.

The bag_eq() function is just like set_eq(), except that it considers the results as bags rather than as sets. A bag is a set that allows duplicates. In practice, it mean that you can use bag_eq() to test result sets where order doesn't matter, but duplication does. In other words, if a two rows are the same in the first result set, the same row must appear twice in the second result set.

Otherwise, this function behaves exactly like set_eq(), including the utility of its diagnostics.

bag_ne()

SELECT bag_ne( :sql, :sql,   :description );
SELECT bag_ne( :sql, :sql                 );
SELECT bag_ne( :sql, :array, :description );
SELECT bag_ne( :sql, :array               );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:array
An array of values representing a single-column row values.
:description
A short description of the test.

The inverse of bag_eq(), this function tests that the results of two queries are not the same, including duplicates. The two queries can as usual be the names of prepared statements or strings containing an SQL query (see the summary for query argument details), or even one of each. The two queries, however, must return results that are directly comparable --- that is, with the same number and types of columns in the same orders. If it happens that the query you're testing returns a single column, the second argument may be an array.

bag_has()

SELECT bag_has( :sql, :sql, :description );
SELECT bag_has( :sql, :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

The bag_has() function is just like set_has(), except that it considers the results as bags rather than as sets. A bag is a set with duplicates. What practice this means that you can use bag_has() to test result sets where order doesn't matter, but duplication does. Internally, it uses an EXCEPT ALL query to determine if there any any unexpectedly missing results.

bag_hasnt()

SELECT bag_hasnt( :sql, :sql, :description );
SELECT bag_hasnt( :sql, :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

This test function is the inverse of bag_hasnt(): the test passes when the results of the first query have none of the results of the second query. Diagnostics are similarly useful:

# Failed test 198
#     Extra records:
#         (44,Anna)
#         (86,Angelina)

Internally, the function uses an INTERSECT ALL query to determine if there is any unexpected overlap between the query results. This means that a duplicate row in the first query will appear twice in the diagnostics if it is also duplicated in the second query.

is_empty()

SELECT is_empty( :sql, :description );
SELECT is_empty( :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

The is_empty() function takes a single query string or prepared statement name as its first argument, and tests that said query returns no records. Internally it simply executes the query and if there are any results, the test fails and the results are displayed in the failure diagnostics, like so:

# Failed test 494: "Should have no inactive users"
#     Records returned:
#         (1,Jacob,false)
#         (2,Emily,false)

isnt_empty()

SELECT isnt_empty( :sql, :description );
SELECT isnt_empty( :sql );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:description
A short description of the test.

This function is the inverse of is_empty(). The test passes if the specified query, when executed, returns at least one row. If it returns no rows, the test fails.

row_eq()

SELECT row_eq( :sql, :record, :description );
SELECT row_eq( :sql, :record );

Parameters

:sql
An SQL statement or the name of a prepared statement, passed as a string.
:record
A row or value, also known as a composite type.
:description
A short description of the test.

Compares the contents of a single row to a record. On PostgreSQL 11 and later, a bare RECORD value may be passed:

SELECT row_eq( $$ SELECT 1, 'foo' $$, ROW(1, 'foo') );

Due to the limitations of non-C functions in earlier versions of PostgreSQL, a bare RECORD value cannot be passed to the function. You must instead pass in a valid composite type value, and cast the record argument (the second argument) to the same type. Both explicitly created composite types and table types are supported. Thus, you can do this:

CREATE TYPE sometype AS (
    id    INT,
    name  TEXT
);

SELECT row_eq( $$ SELECT 1, 'foo' $$, ROW(1, 'foo')::sometype );

And, of course, this:

CREATE TABLE users (
    id   INT,
    name TEXT
);

INSERT INTO users VALUES (1, 'theory');
PREPARE get_user AS SELECT * FROM users LIMIT 1;

SELECT row_eq( 'get_user', ROW(1, 'theory')::users );

Compatible types can be compared, though. So if the users table actually included an active column, for example, and you only wanted to test the id and name, you could do this:

SELECT row_eq(
    $$ SELECT id, name FROM users $$,
    ROW(1, 'theory')::sometype
);

Note the use of the sometype composite type for the second argument. The upshot is that you can create composite types in your tests explicitly for comparing the return values of your queries, if such queries don't return an existing valid type.

Hopefully someday in the future we'll be able to support arbitrary record arguments. In the meantime, this is the 90% solution.

Diagnostics on failure are similar to those from is():

# Failed test 322
#       have: (1,Jacob)
#       want: (1,Larry)

The Schema Things

Need to make sure that your database is designed just the way you think it should be? Use these test functions and rest easy.

A note on comparisons: pgTAP uses a simple equivalence test (=) to compare all SQL identifiers, such as the names of tables, schemas, functions, indexes, and columns (but not data types). So in general, you should always use lowercase strings when passing identifier arguments to the functions below. Use mixed case strings only when the objects were declared in your schema using double-quotes. For example, if you created a table like so:

CREATE TABLE Foo (id integer);

Then you must test for it using only lowercase characters (if you want the test to pass):

SELECT has_table('foo');

If, however, you declared the table using a double-quoted string, like so:

CREATE TABLE "Foo" (id integer);

Then you'd need to test for it using exactly the same string, including case, like so:

SELECT has_table('Foo');

In general, this should not be an issue, as mixed-case objects are created only rarely. So if you just stick to lowercase-only arguments to these functions, you should be in good shape.

I Object!

In a busy development environment, you might have a number of users who make changes to the database schema. Sometimes you have to really work to keep these folks in line. For example, do they add objects to the database without adding tests? Do they drop objects that they shouldn't? These assertions are designed to help you ensure that the objects in the database are exactly the objects that should be in the database, no more, no less.

Each tests tests that all of the objects in the database are only the objects that should be there. In other words, given a list of objects, say tables in a call to tables_are(), this assertion will fail if there are tables that are not in the list, or if there are tables in the list that are missing from the database. It can also be useful for testing replication and the success or failure of schema change deployments.

If you're more interested in the specifics of particular objects, skip to the next section.

tablespaces_are()

SELECT tablespaces_are( :tablespaces, :description );
SELECT tablespaces_are( :tablespaces );

Parameters

:tablespaces
An array of tablespace names.
:description
A short description of the test.

This function tests that all of the tablespaces in the database only the tablespaces that should be there. Example:

SELECT tablespaces_are(ARRAY[ 'dbspace', 'indexspace' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing tablespaces, like so:

# Failed test 121: "There should be the correct tablespaces"
#     Extra tablespaces:
#         trigspace
#     Missing tablespaces:
#         indexspace

schemas_are()

SELECT schemas_are( :schemas, :description );
SELECT schemas_are( :schemas );

Parameters

:schemas
An array of schema names.
:description
A short description of the test.

This function tests that all of the schemas in the database only the schemas that should be there, excluding system schemas and information_schema. Example:

SELECT schemas_are(ARRAY[ 'public', 'contrib', 'tap' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing schemas, like so:

# Failed test 106: "There should be the correct schemas"
#     Extra schemas:
#         __howdy__
#     Missing schemas:
#         someschema

tables_are()

SELECT tables_are( :schema, :tables, :description );
SELECT tables_are( :schema, :tables );
SELECT tables_are( :tables, :description );
SELECT tables_are( :tables );

Parameters

:schema
Name of a schema in which to find tables.
:tables
An array of table names.
:description
A short description of the test.

This function tests that all of the tables in the named schema, or that are visible in the search path, are only the tables that should be there. If the :schema argument is omitted, tables will be sought in the search path, excluding pg_catalog and information_schema If the description is omitted, a generally useful default description will be generated. Example:

SELECT tables_are(
    'myschema',
    ARRAY[ 'users', 'widgets', 'gadgets', 'session' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing tables, like so:

# Failed test 91: "Schema public should have the correct tables"
#     Extra tables:
#         mallots
#         __test_table
#     Missing tables:
#         users
#         widgets

partitions_are()

SELECT partitions_are( :schema, :table, :partitions :description );
SELECT partitions_are( :schema, :table, :partitions );
SELECT partitions_are( :table, :partitions :description );
SELECT partitions_are( :table, :partitions );

Parameters

:schema
Name of a schema in which to find the partitioned table.
:table
Name of a partitioned table.
:partitions
An array of partition table names.
:description
A short description of the test.

This function tests that the named table has all of the specified partitions, and those are its only partitions. The test casts partition names to the regclass type; therefore, partition names should be specified relative to the search path. Those in the search path should not be schema-qualified, while those outside the search path should be schema-qualified. Partition names and schemas should be appropriately quoted as identifiers where appropriate.

If the :schema argument is omitted, the partitioned table must be visible the search path. If the description is omitted, a generally useful default description will be generated. Example:

SELECT partitions_are(
    'myschema', 'mylog',
    ARRAY[ 'log1', 'log2', 'log3', 'log4' ]
);

Example for partitions outside the search path and requiring identifier-quoting:

SELECT partitions_are(
    'myschema', 'MyLog',
    ARRAY[ 'hidden."Log 1"', 'hidden."Log 2"' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing partitions, like so:

# Failed test 12: "Table myschema should have the correct partitions"
#     Extra partitions:
#         part4
#         hidden."Part 5"
#     Missing partitions:
#         part5
#         part6

foreign_tables_are()

SELECT foreign_tables_are( :schema, :foreign_tables, :description );
SELECT foreign_tables_are( :schema, :foreign_tables );
SELECT foreign_tables_are( :foreign_tables, :description );
SELECT foreign_tables_are( :foreign_tables );

Parameters

:schema
Name of a schema in which to find foreign tables.
:foreign_tables
An array of foreign table names.
:description
A short description of the test.

This function tests that all of the foreign tables in the named schema, or that are visible in the search path, are only the foreign tables that should be there. If the :schema argument is omitted, foreign tables will be sought in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT foreign_tables_are(
    'myschema',
    ARRAY[ 'users', 'widgets', 'gadgets', 'session' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing foreign tables, like so:

# Failed test 91: "Schema public should have the correct foreign tables"
#     Extra foreign tables:
#         mallots
#         __test_table
#     Missing foreign tables:
#         users
#         widgets

views_are()

SELECT views_are( :schema, :views, :description );
SELECT views_are( :schema, :views );
SELECT views_are( :views, :description );
SELECT views_are( :views );

Parameters

:schema
Name of a schema in which to find views.
:views
An array of view names.
:description
A short description of the test.

This function tests that all of the views in the named schema, or that are visible in the search path, are only the views that should be there. If the :schema argument is omitted, views will be sought in the search path, excluding pg_catalog and information_schema If the description is omitted, a generally useful default description will be generated. Example:

SELECT views_are(
    'myschema',
    ARRAY[ 'users', 'widgets', 'gadgets', 'session' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing views, like so:

# Failed test 92: "Schema public should have the correct views"
#     Extra views:
#         v_userlog_tmp
#         __test_view
#     Missing views:
#         v_userlog
#         eated

materialized_views_are()

SELECT materialized_views_are( :schema, :materialized_views, :description );
SELECT materialized_views_are( :schema, :materialized_views );
SELECT materialized_views_are( :materialized_views, :description );
SELECT materialized_views_are( :materialized_views );

Parameters

:schema
Name of a schema in which to find materialized views.
:materialized_views
An array of materialized view names.
:description
A short description of the test.

This function tests that all of the materialized views in the named schema, or that are visible in the search path, are only the materialized views that should be there. If the :schema argument is omitted, materialized views will be sought in the search path, excluding pg_catalog and information_schema If the description is omitted, a generally useful default description will be generated. Example:

SELECT materialized_views_are(
    'myschema',
    ARRAY[ 'users', 'widgets', 'gadgets', 'session' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing materialized views, like so:

# Failed test 92: "Schema public should have the correct materialized views"
#     Extra materialized views:
#         v_userlog_tmp
#         __test_view
#     Missing materialized views:
#         v_userlog
#         eated

sequences_are()

SELECT sequences_are( :schema, :sequences, :description );
SELECT sequences_are( :schema, :sequences );
SELECT sequences_are( :sequences, :description );
SELECT sequences_are( :sequences );

Parameters

:schema
Name of a schema in which to find sequences.
:sequences
An array of sequence names.
:description
A short description of the test.

This function tests that all of the sequences in the named schema, or that are visible in the search path, are only the sequences that should be there. If the :schema argument is omitted, sequences will be sought in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT sequences_are(
    'myschema',
    ARRAY[ 'users', 'widgets', 'gadgets', 'session' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing sequences, like so:

# Failed test 93: "Schema public should have the correct sequences"
#     These are extra sequences:
#         seq_mallots
#         __test_table_seq
#     These sequences are missing:
#         users_seq
#         widgets_seq

columns_are()

SELECT columns_are( :schema, :table, :columns, :description );
SELECT columns_are( :schema, :table, :columns );
SELECT columns_are( :table,  :columns, :description );
SELECT columns_are( :table,  :columns );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table in which to find columns.
:columns
An array of column names.
:description
A short description of the test.

This function tests that all of the columns on the named table are only the columns that should be on that table. If the :schema argument is omitted, the table must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT columns_are(
    'myschema',
    'atable',
    ARRAY[ 'id', 'name', 'rank', 'sn' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing columns, like so:

# Failed test 183: "Table users should have the correct columns"
#     Extra columns:
#         given_name
#         surname
#     Missing columns:
#         name

indexes_are()

SELECT indexes_are( :schema, :table, :indexes, :description );
SELECT indexes_are( :schema, :table, :indexes );
SELECT indexes_are( :table,  :indexes, :description );
SELECT indexes_are( :table,  :indexes );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table in which to find indexes.
:indexes
An array of index names.
:description
A short description of the test.

This function tests that all of the indexes on the named table are only the indexes that should be on that table. If the :schema argument is omitted, the table must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT indexes_are(
    'myschema',
    'atable',
    ARRAY[ 'atable_pkey', 'idx_atable_name' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing indexes, like so:

# Failed test 180: "Table fou should have the correct indexes"
#     Extra indexes:
#         fou_pkey
#     Missing indexes:
#         idx_fou_name

triggers_are()

SELECT triggers_are( :schema, :table, :triggers, :description );
SELECT triggers_are( :schema, :table, :triggers );
SELECT triggers_are( :table,  :triggers, :description );
SELECT triggers_are( :table,  :triggers );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table in which to find triggers.
:triggers
An array of trigger names.
:description
A short description of the test.

This function tests that all of the triggers on the named table are only the triggers that should be on that table. If the :schema argument is omitted, the table must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT triggers_are(
    'myschema',
    'atable',
    ARRAY[ 'atable_pkey', 'idx_atable_name' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing triggers, like so:

# Failed test 180: "Table fou should have the correct triggers"
#     Extra triggers:
#         set_user_pass
#     Missing triggers:
#         set_users_pass

functions_are()

SELECT functions_are( :schema, :functions, :description );
SELECT functions_are( :schema, :functions );
SELECT functions_are( :functions, :description );
SELECT functions_are( :functions );

Parameters

:schema
Name of a schema in which to find functions.
:functions
An array of function and/or procedure names.
:description
A short description of the test.

This function tests that all of the functions or procedures in the named schema, or that are visible in the search path, are only the functions that should be there. If the :schema argument is omitted, functions will be sought in the search path, excluding pg_catalog and information_schema If the description is omitted, a generally useful default description will be generated. Example:

SELECT functions_are(
    'myschema',
    ARRAY[ 'foo', 'bar', 'frobnitz' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing functions, like so:

# Failed test 150: "Schema someschema should have the correct functions"
#     Extra functions:
#         schnauzify
#     Missing functions:
#         frobnitz

roles_are()

SELECT roles_are( :roles, :description );
SELECT roles_are( :roles );

Parameters

:roles
An array of role names.
:description
A short description of the test.

This function tests that all of the roles in the database only the roles that should be there. Example:

SELECT roles_are(ARRAY[ 'postgres', 'someone', 'root' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing roles, like so:

# Failed test 195: "There should be the correct roles"
#     Extra roles:
#         root
#     Missing roles:
#         bobby

users_are()

SELECT users_are( :users, :description );
SELECT users_are( :users );

Parameters

:users
An array of user names.
:description
A short description of the test.

This function tests that all of the users in the database only the users that should be there. Example:

SELECT users_are(ARRAY[ 'postgres', 'someone', 'root' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing users, like so:

# Failed test 195: "There should be the correct users"
#     Extra users:
#         root
#     Missing users:
#         bobby

groups_are()

SELECT groups_are( :groups, :description );
SELECT groups_are( :groups );

Parameters

:groups
An array of group names.
:description
A short description of the test.

This function tests that all of the groups in the database only the groups that should be there. Example:

SELECT groups_are(ARRAY[ 'postgres', 'admins, 'l0s3rs' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing groups, like so:

# Failed test 210: "There should be the correct groups"
#     Extra groups:
#         meanies
#     Missing groups:
#         __howdy__

languages_are()

SELECT languages_are( :languages, :description );
SELECT languages_are( :languages );

Parameters

:languages
An array of language names.
:description
A short description of the test.

This function tests that all of the languages in the database only the languages that should be there. Example:

SELECT languages_are(ARRAY[ 'plpgsql', 'plperl', 'pllolcode' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing languages, like so:

# Failed test 225: "There should be the correct procedural languages"
#     Extra languages:
#         pllolcode
#     Missing languages:
#         plpgsql

opclasses_are()

SELECT opclasses_are( :schema, :opclasses, :description );
SELECT opclasses_are( :schema, :opclasses );
SELECT opclasses_are( :opclasses, :description );
SELECT opclasses_are( :opclasses );

Parameters

:schema
Name of a schema in which to find opclasses.
:opclasses
An array of opclass names.
:description
A short description of the test.

This function tests that all of the operator classes in the named schema, or that are visible in the search path, are only the opclasses that should be there. If the :schema argument is omitted, opclasses will be sought in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT opclasses_are(
    'myschema',
    ARRAY[ 'foo', 'bar', 'frobnitz' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing opclasses, like so:

# Failed test 251: "Schema public should have the correct operator classes"
#     Extra operator classes:
#         goofy_ops
#     Missing operator classes:
#         custom_ops

rules_are()

SELECT rules_are( :schema, :table, :rules, :description );
SELECT rules_are( :schema, :table, :rules );
SELECT rules_are( :table,  :rules, :description );
SELECT rules_are( :table,  :rules );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table in which to find rules.
:rules
An array of rule names.
:description
A short description of the test.

This function tests that all of the rules on the named relation are only the rules that should be on that relation (a table, view or a materialized view). If the :schema argument is omitted, the rules must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT rules_are(
    'myschema',
    'atable',
    ARRAY[ 'on_insert', 'on_update', 'on_delete' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing rules, like so:

# Failed test 281: "Relation public.users should have the correct rules"
#     Extra rules:
#         on_select
#     Missing rules:
#         on_delete

types_are()

SELECT types_are( :schema, :types, :description );
SELECT types_are( :schema, :types );
SELECT types_are( :types, :description );
SELECT types_are( :types );

Parameters

:schema
Name of a schema in which to find types.
:types
An array of data type names.
:description
A short description of the test.

Tests that all of the types in the named schema are the only types in that schema, including base types, composite types, domains, enums, and pseudo-types. If the :schema argument is omitted, the types must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT types_are('myschema', ARRAY[ 'timezone', 'state' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing types, like so:

# Failed test 307: "Schema someschema should have the correct types"
#     Extra types:
#         sometype
#     Missing types:
#         timezone

domains_are()

SELECT domains_are( :schema, :domains, :description );
SELECT domains_are( :schema, :domains );
SELECT domains_are( :domains, :description );
SELECT domains_are( :domains );

Parameters

:schema
Name of a schema in which to find domains.
:domains
An array of data domain names.
:description
A short description of the test.

Tests that all of the domains in the named schema are the only domains in that schema. If the :schema argument is omitted, the domains must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT domains_are('myschema', ARRAY[ 'timezone', 'state' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing domains, like so:

# Failed test 327: "Schema someschema should have the correct domains"
#     Extra domains:
#         somedomain
#     Missing domains:
#         timezone

enums_are()

SELECT enums_are( :schema, :enums, :description );
SELECT enums_are( :schema, :enums );
SELECT enums_are( :enums, :description );
SELECT enums_are( :enums );

Parameters

:schema
Name of a schema in which to find enums.
:enums
An array of enum data type names.
:description
A short description of the test.

Tests that all of the enums in the named schema are the only enums in that schema. If the :schema argument is omitted, the enums must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT enums_are('myschema', ARRAY[ 'timezone', 'state' ]);

In the event of a failure, you'll see diagnostics listing the extra and/or missing enums, like so:

# Failed test 333: "Schema someschema should have the correct enums"
#     Extra enums:
#         someenum
#     Missing enums:
#         bug_status

casts_are()

SELECT casts_are( :casts, :description );
SELECT casts_are( :casts );

Parameters

:casts
An array of cast names.
:description
A short description of the test.

This function tests that all of the casts in the database are only the casts that should be in that database. Casts are specified as strings in a syntax similarly to how they're declared via CREATE CAST. The pattern is :source_type AS :target_type. If either type was created with double-quotes to force mixed case or special characters, then you must use double quotes in the cast strings. Example:

SELECT casts_are(ARRAY[
    'integer AS "myInteger"',
    'integer AS double precision',
    'integer AS reltime',
    'integer AS numeric',
]);

If the description is omitted, a generally useful default description will be generated.

In the event of a failure, you'll see diagnostics listing the extra and/or missing casts, like so:

# Failed test 302: "There should be the correct casts"
#     Extra casts:
#         lseg AS point
#     Missing casts:
#         lseg AS integer

operators_are()

SELECT operators_are( :schema, :operators, :description );
SELECT operators_are( :schema, :operators );
SELECT operators_are( :operators, :description );
SELECT operators_are( :operators );

Parameters

:schema
Name of a schema in which to find operators.
:operators
An array of operators.
:description
A short description of the test.

Tests that all of the operators in the named schema are the only operators in that schema. If the :schema argument is omitted, the operators must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated.

The :operators argument is specified as an array of strings in which each operator is defined similarly to the display of the :regoperator type. The format is :op(:leftop,:rightop) RETURNS :return_type.

For left operators the left argument type should be NONE. For right operators, the right argument type should be NONE. The example above shows one one of each of the operator types. =(citext,citext) is an infix operator, -(bigint,NONE) is a left operator, and !(NONE,bigint) is a right operator. Example:

SELECT operators_are(
    'public',
    ARRAY[
        '=(citext,citext) RETURNS boolean',
        '-(NONE,bigint) RETURNS bigint',
        '!(bigint,NONE) RETURNS numeric'
    ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing operators, like so:

# Failed test 453: "Schema public should have the correct operators"
#     Extra operators:
#         +(integer,integer) RETURNS integer
#     Missing enums:
#         +(integer,text) RETURNS text

extensions_are()

SELECT extensions_are( :schema, :extensions, :description );
SELECT extensions_are( :schema, :extensions );
SELECT extensions_are( :extensions, :description );
SELECT extensions_are( :extensions );

Parameters

:schema
Name of a schema associated with the extensions.
:extensions
An array of extension names.
:description
A short description of the test.

This function tests all of the extensions that should be present. If :schema is specified, it will test only for extensions associated the named schema (via the schema parameter in the extension's control file, ov the WITH SCHEMA clause of the CREATE EXTENSION statement). Otherwise it will check for all extension in the database, including pgTAP itself. If the description is omitted, a generally useful default description will be generated. Example:

SELECT extensions_are(
    'myschema',
    ARRAY[ 'citext', 'isn', 'plpgsql' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing extensions, like so:

# Failed test 91: "Schema public should have the correct extensions"
#     Extra extensions:
#         pgtap
#         ltree
#     Missing extensions:
#         citext
#         isn

To Have or Have Not

Perhaps you're not so concerned with ensuring the precise correlation of database objects. Perhaps you just need to make sure that certain objects exist (or that certain objects don't exist). You've come to the right place.

has_tablespace()

SELECT has_tablespace( :tablespace, :location, :description );
SELECT has_tablespace( :tablespace, :description );
SELECT has_tablespace( :tablespace );

Parameters

:tablespace
Name of a tablespace.
:location
The tablespace's Location on disk.
:description
A short description of the test.

This function tests whether or not a tablespace exists in the database. The first argument is a tablespace name. The second is either the a file system path for the database or a test description. If you specify a location path, you must pass a description as the third argument; otherwise, if you omit the test description, it will be set to "Tablespace :tablespace should exist". Example:

SELECT has_tablespace('sometablespace', '/data/dbs');

hasnt_tablespace()

SELECT hasnt_tablespace( :tablespace, :description );
SELECT hasnt_tablespace( :tablespace );

Parameters

:tablespace
Name of a tablespace.
:description
A short description of the test.

This function is the inverse of has_tablespace(). The test passes if the specified tablespace does not exist.

has_schema()

SELECT has_schema( :schema, :description );
SELECT has_schema( :schema );

Parameters

:schema
Name of a schema.
:description
A short description of the test.

This function tests whether or not a schema exists in the database. The first argument is a schema name and the second is the test description. If you omit the test description, it will be set to "Schema :schema should exist".

hasnt_schema()

SELECT hasnt_schema(
    'someschema',
    'There should be no schema someschema'
);

Parameters

:schema
Name of a schema.
:description
A short description of the test.

This function is the inverse of has_schema(). The test passes if the specified schema does not exist.

has_relation()

SELECT has_relation( :schema, :relation, :description );
SELECT has_relation( :relation, :description );
SELECT has_relation( :relation );

Parameters

:schema
Name of a schema in which to find the relation.
:relation
Name of a relation.
:description
A short description of the test.

This function tests whether or not a relation exists in the database. Relations are tables, views, materialized views, sequences, composite types, foreign tables, and toast tables. The first argument is a schema name, the second is a relation name, and the third is the test description. If you omit the schema, the relation must be visible in the search path. Example:

SELECT has_relation('myschema', 'somerelation');

If you omit the test description, it will be set to "Relation :relation should exist".

hasnt_relation()

SELECT hasnt_relation( :schema, :relation, :description );
SELECT hasnt_relation( :relation, :description );
SELECT hasnt_relation( :relation );

Parameters

:schema
Name of a schema in which to find the relation.
:relation
Name of a relation.
:description
A short description of the test.

This function is the inverse of has_relation(). The test passes if the specified relation does not exist.

has_table()

SELECT has_table( :schema, :table, :description );
SELECT has_table( :schema, :table );
SELECT has_table( :table, :description );
SELECT has_table( :table );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

This function tests whether or not a table exists in the database. The first argument is a schema name, the second is a table name, and the third is the test description. If you omit the schema, the table must be visible in the search path. Example:

SELECT has_table('myschema'::name, 'sometable'::name);

If you omit the test description, it will be set to "Table :table should exist".

Note that this function will not recognize foreign tables; use has_foreign_table() to test for the presence of foreign tables.

hasnt_table()

SELECT hasnt_table( :schema, :table, :description );
SELECT hasnt_table( :schema, :table );
SELECT hasnt_table( :table, :description );
SELECT hasnt_table( :table );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

This function is the inverse of has_table(). The test passes if the specified table does not exist.

has_view()

SELECT has_view( :schema, :view, :description );
SELECT has_view( :schema, :view );
SELECT has_view( :view, :description );
SELECT has_view( :view );

Parameters

:schema
Name of a schema in which to find the view.
:view
Name of a view.
:description
A short description of the test.

This function tests whether or not a view exists in the database. The first argument is a schema name, the second is a view name, and the third is the test description. If you omit the schema, the view must be visible in the search path. Example:

SELECT has_view('myschema', 'someview');

If you omit the test description, it will be set to "View :view should exist".

hasnt_view()

SELECT hasnt_view( :schema, :view, :description );
SELECT hasnt_view( :schema, :view );
SELECT hasnt_view( :view, :description );
SELECT hasnt_view( :view );

Parameters

:schema
Name of a schema in which to find the view.
:view
Name of a view.
:description
A short description of the test.

This function is the inverse of has_view(). The test passes if the specified view does not exist.

has_materialized_view()

SELECT has_materialized_view( :schema, :materialized_view, :description );
SELECT has_materialized_view( :materialized_view, :description );
SELECT has_materialized_view( :materialized_view );

Parameters

:schema
Name of a schema in which to find the materialized view.
:materialized_view
Name of a materialized view.
:description
A short description of the test.

This function tests whether or not a materialized view exists in the database. The first argument is a schema name, the second is a materialized view name, and the third is the test description. If you omit the schema, the materialized view must be visible in the search path. Example:

SELECT has_materialized_view('myschema', 'some_materialized_view');

If you omit the test description, it will be set to "Materialized view :materialized_view should exist".

hasnt_materialized_view()

SELECT hasnt_materialized_view( :schema, :materialized_view, :description );
SELECT hasnt_materialized_view( :materialized_view, :description );
SELECT hasnt_materialized_view( :materialized_view );

Parameters

:schema
Name of a schema in which to find the materialized view.
:materialized_view
Name of a materialized view.
:description
A short description of the test.

This function is the inverse of has_view(). The test passes if the specified materialized view does not exist.

has_inherited_tables()

SELECT has_inherited_tables( :schema, :table, :description );
SELECT has_inherited_tables( :schema, :table );
SELECT has_inherited_tables( :table, :description );
SELECT has_inherited_tables( :table );

Parameters

:schema
Name of a schema in which to search for the table that has children.
:table
Name of the table that must have children.
:description
A description of the test.

This function checks that the specified table has other tables that inherit from it. If you find that the function call confuses the table name for a description, cast the table to the NAME type:

SELECT has_inherited_tables('myschema', 'sometable'::NAME);

hasnt_inherited_tables()

SELECT hasnt_inherited_tables( :schema, :table, :description );
SELECT hasnt_inherited_tables( :schema, :table );
SELECT hasnt_inherited_tables( :table, :description );
SELECT hasnt_inherited_tables( :table );

Parameters

:schema
Name of a schema in which to search for the table that must not have children.
:table
Name of the table that must not have children.
:description
A description of the test.

This function checks that the specified table has no tables inheriting from it. It is the opposite of the function has_inherited_tables(). If you find that the function call confuses the table name for a description, cast the table to the NAME type:

SELECT hasnt_inherited_tables('myschema', 'sometable'::NAME);

is_ancestor_of()

SELECT is_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table, :depth, :description );
SELECT is_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table, :depth );
SELECT is_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table, :description );
SELECT is_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table );
SELECT is_ancestor_of( :ancestor_table, :descendent_table, :depth, :description );
SELECT is_ancestor_of( :ancestor_table, :descendent_table, :depth );
SELECT is_ancestor_of( :ancestor_table, :descendent_table, :description );
SELECT is_ancestor_of( :ancestor_table, :descendent_table );

Parameters

:ancestor_schema
Name of the schema in which the ancestor table must be found.
:ancestor_table
Name of the ancestor table.
:descendent_schema
Name of the schema in which the descendent table must be found.
:descendent_table
Name of the descendent table.
:depth
The inheritance distance between the two tables.
:description
Description of the test.

This function checks if the table marked as "ancestor" is effectively a table from which the "descendent" table inherits --- that there is an inheritance chain between the two tables. The optional depth argument specifies the length of the inheritance chain between the tables; if not specified, the inheritance distance may be of any length. If the :description is omitted, a reasonable substitute will be created.

If you find that the function call seems to be getting confused, cast the sequence to the NAME type:

SELECT is_ancestor_of('myschema', 'ancestor', 'myschema', 'descendent'::NAME);

isnt_ancestor_of()

SELECT isnt_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table, :depth, :description );
SELECT isnt_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table, :depth );
SELECT isnt_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table, :description );
SELECT isnt_ancestor_of( :ancestor_schema, :ancestor_table, :descendent_schema, :descendent_table );
SELECT isnt_ancestor_of( :ancestor_table, :descendent_table, :depth, :description );
SELECT isnt_ancestor_of( :ancestor_table, :descendent_table, :depth );
SELECT isnt_ancestor_of( :ancestor_table, :descendent_table, :description );
SELECT isnt_ancestor_of( :ancestor_table, :descendent_table );

Parameters

:ancestor_schema
Name of the schema in which the ancestor table must be found.
:ancestor_table
Name of the ancestor table.
:descendent_schema
Name of the schema in which the descendent table must be found.
:descendent_table
Name of the descendent table.
:depth
The inheritance distance between the two tables.
:description
Description of the test.

This function ensures that the table marked as "ancestor" is not a table from which "descendent" inherits --- that there is no inheritance chain between the two tables. If the optional depth argument is passed, the test enbsures only that the two tablesa are not related at that distance; they still might be an inheritance relationship between them. If the :description is omitted, a reasonable substitute will be created.

If you find that the function call seems to be getting confused, cast the sequence to the NAME type:

SELECT isnt_ancestor_of('myschema', 'ancestor', 'myschema', 'descendent'::NAME);

is_descendent_of()

SELECT is_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table, :depth, :description );
SELECT is_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table, :depth );
SELECT is_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table, :description );
SELECT is_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table );
SELECT is_descendent_of( :descendent_table,  :ancestor_table, :depth, :description );
SELECT is_descendent_of( :descendent_table,  :ancestor_table, :depth );
SELECT is_descendent_of( :descendent_table,  :ancestor_table, :description );
SELECT is_descendent_of( :descendent_table,  :ancestor_table );

Parameters

:descendent_schema
Name of the schema in which the descendent table must be found.
:descendent_table
Name of the descendent table.
:ancestor_schema
Name of the schema in which the ancestor table must be found.
:ancestor_table
Name of the ancestor table.
:depth
The inheritance distance between the two tables.
:description
Description of the test.

This function provide exactly the same functionality as is_ancestor_of(), but with the ancestor and descendent arguments swapped.

isnt_descendent_of()

SELECT isnt_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table, :depth, :description );
SELECT isnt_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table, :depth );
SELECT isnt_descendent_of( :descendent_schema, :descendent_table, :ancestor_schema, :ancestor_table, :description );
SELECT isnt_descendent_of( :descendent_table,  :ancestor_table, :depth, :description );
SELECT isnt_descendent_of( :descendent_table,  :ancestor_table, :depth );
SELECT isnt_descendent_of( :descendent_table,  :ancestor_table, :description );
SELECT isnt_descendent_of( :descendent_table,  :ancestor_table );

Parameters

:ancestor_schema
Name of the schema in which the ancestor table must be found.
:ancestor_table
Name of the ancestor table.
:descendent_schema
Name of the schema in which the descendent table must be found.
:descendent_table
Name of the descendent table.
:depth
The inheritance distance between the two tables.
:description
Description of the test.

This function provide exactly the same functionality as isnt_ancestor_of(), but with the ancestor and descendent arguments swapped.

has_sequence()

SELECT has_sequence( :schema, :sequence, :description );
SELECT has_sequence( :schema, :sequence );
SELECT has_sequence( :sequence, :description );
SELECT has_sequence( :sequence );

Parameters

:schema
Name of a schema in which to find the sequence.
:sequence
Name of a sequence.
:description
A short description of the test.

This function tests whether or not a sequence exists in the database. The first argument is a schema name, the second is a sequence name, and the third is the test description. If you omit the schema, the sequence must be visible in the search path. Example:

SELECT has_sequence('somesequence');

If you omit the test description, it will be set to "Sequence :schema.:sequence should exist". If you find that the function call seems to be getting confused, cast the sequence to the NAME type:

SELECT has_sequence('myschema', 'somesequence'::NAME);

hasnt_sequence()

SELECT hasnt_sequence( :schema, :sequence, :description );
SELECT hasnt_sequence( :sequence, :description );
SELECT hasnt_sequence( :sequence );

Parameters

:schema
Name of a schema in which to find the sequence.
:sequence
Name of a sequence.
:description
A short description of the test.

This function is the inverse of has_sequence(). The test passes if the specified sequence does not exist.

has_foreign_table()

SELECT has_foreign_table( :schema, :table, :description );
SELECT has_foreign_table( :schema, :table );
SELECT has_foreign_table( :table, :description );
SELECT has_foreign_table( :table );

Parameters

:schema
Name of a schema in which to find the foreign table.
:table
Name of a foreign table.
:description
A short description of the test.

This function tests whether or not a foreign table exists in the database. The first argument is a schema name, the second is a foreign table name, and the third is the test description. If you omit the schema, the foreign table must be visible in the search path. Example:

SELECT has_foreign_table('myschema'::name, 'some_foreign_table'::name);

If you omit the test description, it will be set to "Foreign table :table should exist".

hasnt_foreign_table()

SELECT hasnt_foreign_table( :schema, :table, :description );
SELECT hasnt_foreign_table( :schema, :table );
SELECT hasnt_foreign_table( :table, :description );
SELECT hasnt_foreign_table( :table );

Parameters

:schema
Name of a schema in which to find the foreign table.
:table
Name of a foreign table.
:description
A short description of the test.

This function is the inverse of has_foreign_table(). The test passes if the specified foreign table does not exist.

has_type()

SELECT has_type( schema, type, description );
SELECT has_type( schema, type );
SELECT has_type( type, description );
SELECT has_type( type );

Parameters

:schema
Name of a schema in which to find the data type.
:type
Name of a data type.
:description
A short description of the test.

This function tests whether or not a type exists in the database. Detects all types of types, including base types, composite types, domains, enums, and pseudo-types. The first argument is a schema name, the second is a type name, and the third is the test description. If you omit the schema, the type must be visible in the search path. If you omit the test description, it will be set to "Type :type should exist". If you're passing a schema and type rather than type and description, be sure to cast the arguments to name values so that your type name doesn't get treated as a description. Example:

SELECT has_type( 'myschema', 'sometype' );

If you've created a composite type and want to test that the composed types are a part of it, use the column testing functions to verify them, like so:

CREATE TYPE foo AS (id int, name text);
SELECT has_type( 'foo' );
SELECT has_column( 'foo', 'id' );
SELECT col_type_is( 'foo', 'id', 'integer' );

hasnt_type()

SELECT hasnt_type( schema, type, description );
SELECT hasnt_type( schema, type );
SELECT hasnt_type( type, description );
SELECT hasnt_type( type );

Parameters

:schema
Name of a schema in which to find the data type.
:type
Name of a data type.
:description
A short description of the test.

This function is the inverse of has_type(). The test passes if the specified type does not exist.

has_composite()

SELECT has_composite( schema, type, description );
SELECT has_composite( schema, type );
SELECT has_composite( type, description );
SELECT has_composite( type );

Parameters

:schema
Name of a schema in which to find the composite type.
:composite type
Name of a composite type.
:description
A short description of the test.

This function tests whether or not a composite type exists in the database. The first argument is a schema name, the second is the name of a composite type, and the third is the test description. If you omit the schema, the composite type must be visible in the search path. If you omit the test description, it will be set to "Composite type :composite type should exist". Example:

SELECT has_composite( 'myschema', 'somecomposite' );

If you're passing a schema and composite type rather than composite type and description, be sure to cast the arguments to name values so that your composite type name doesn't get treated as a description.

hasnt_composite()

SELECT hasnt_composite( schema, type, description );
SELECT hasnt_composite( schema, type );
SELECT hasnt_composite( type, description );
SELECT hasnt_composite( type );

Parameters

:schema
Name of a schema in which to find the composite type.
:composite type
Name of a composite type.
:description
A short description of the test.

This function is the inverse of has_composite(). The test passes if the specified composite type does not exist.

has_domain()

SELECT has_domain( schema, domain, description );
SELECT has_domain( schema, domain );
SELECT has_domain( domain, description );
SELECT has_domain( domain );

Parameters

:schema
Name of a schema in which to find the domain.
:domain
Name of a domain.
:description
A short description of the test.

This function tests whether or not a domain exists in the database. The first argument is a schema name, the second is the name of a domain, and the third is the test description. If you omit the schema, the domain must be visible in the search path. If you omit the test description, it will be set to "Domain :domain should exist". Example:

SELECT has_domain( 'myschema', 'somedomain' );

If you're passing a schema and domain rather than domain and description, be sure to cast the arguments to name values so that your domain name doesn't get treated as a description.

hasnt_domain()

SELECT hasnt_domain( schema, domain, description );
SELECT hasnt_domain( schema, domain );
SELECT hasnt_domain( domain, description );
SELECT hasnt_domain( domain );

Parameters

:schema
Name of a schema in which to find the domain.
:domain
Name of a domain.
:description
A short description of the test.

This function is the inverse of has_domain(). The test passes if the specified domain does not exist.

has_enum()

SELECT has_enum( schema, enum, description );
SELECT has_enum( schema, enum );
SELECT has_enum( enum, description );
SELECT has_enum( enum );

Parameters

:schema
Name of a schema in which to find the enum.
:enum
Name of a enum.
:description
A short description of the test.

This function tests whether or not a enum exists in the database. The first argument is a schema name, the second is the an enum name, and the third is the test description. If you omit the schema, the enum must be visible in the search path. If you omit the test description, it will be set to "Enum :enum should exist". Example:

SELECT has_enum( 'myschema', 'someenum' );

If you're passing a schema and enum rather than enum and description, be sure to cast the arguments to name values so that your enum name doesn't get treated as a description.

hasnt_enum()

SELECT hasnt_enum( schema, enum, description );
SELECT hasnt_enum( schema, enum );
SELECT hasnt_enum( enum, description );
SELECT hasnt_enum( enum );

Parameters

:schema
Name of a schema in which to find the enum.
:enum
Name of a enum.
:description
A short description of the test.

This function is the inverse of has_enum(). The test passes if the specified enum does not exist.

has_index()

SELECT has_index( :schema, :table, :index, :columns, :description );
SELECT has_index( :schema, :table, :index, :columns );
SELECT has_index( :schema, :table, :index, :column, :description );
SELECT has_index( :schema, :table, :index, :column );
SELECT has_index( :schema, :table, :index, :description );
SELECT has_index( :schema, :table, :index );
SELECT has_index( :table,  :index, :columns, :description );
SELECT has_index( :table,  :index, :columns );
SELECT has_index( :table,  :index, :column, :description );
SELECT has_index( :table,  :index, :column );
SELECT has_index( :table,  :index, :description );
SELECT has_index( :table,  :index );

Parameters

:schema
Name of a schema in which to find the index.
:table
Name of a table in which to find index.
:index
Name of an index.
:columns
Array of the columns and/or expressions in the index.
:column
Indexed column name or expression.
:description
A short description of the test.

Checks for the existence of a named index associated with the named table. The :schema argument is optional, as is the column name or names or expression, and the description. The columns argument may be a string naming one column or expression, or an array of column names and/or expressions. For expressions, you must use lowercase for all SQL keywords and functions to properly compare to PostgreSQL's internal form of the expression. Non-functional expressions should also be wrapped in parentheses. A few examples:

SELECT has_index(
    'myschema',
    'sometable',
    'myindex',
    ARRAY[ 'somecolumn', 'anothercolumn', 'lower(txtcolumn)' ],
    'Index "myindex" should exist'
);

SELECT has_index('myschema', 'sometable', 'anidx', 'somecolumn');
SELECT has_index('myschema', 'sometable', 'loweridx', '(somearray[1])');
SELECT has_index('sometable', 'someindex');

If you find that the function call seems to be getting confused, cast the index name to the NAME type:

SELECT has_index( 'public', 'sometab', 'idx_foo', 'name'::name );

If the index does not exist, has_index() will output a diagnostic message such as:

# Index "blah" ON public.sometab not found

If the index was found but the column specification or expression is incorrect, the diagnostics will look more like this:

#       have: "idx_baz" ON public.sometab(lower(name))
#       want: "idx_baz" ON public.sometab(lower(lname))

Note that unlike most other column parameter arguments in pgTAP, mixed-case column mames crated with double-quotes must be double-quoted when passed to has_index(), like so:

SELECT has_index(
    'myschema',
    'sometable',
    'myindex',
    ARRAY[ 'id', '"Name"', 'lower("foo-bar")' ]
);

This caveat applies only to column names, not to table and schema names, which should omit double-quoting.

hasnt_index()

SELECT hasnt_index( schema, table, index, description );
SELECT hasnt_index( schema, table, index );
SELECT hasnt_index( table, index, description );
SELECT hasnt_index( table, index );

Parameters

:schema
Name of a schema in which to not find the index.
:table
Name of a table in which to not find the index.
:index
Name of an index.
:description
A short description of the test.

This function is the inverse of has_index(). The test passes if the specified index does not exist.

has_trigger()

SELECT has_trigger( :schema, :table, :trigger, :description );
SELECT has_trigger( :schema, :table, :trigger );
SELECT has_trigger( :table, :trigger, :description );
SELECT has_trigger( :table, :trigger )` ###

Parameters

:schema
Name of a schema in which to find the trigger.
:table
Name of a table in which to find the trigger.
:trigger
Name of an trigger.
:description
A short description of the test.

Tests to see if the specified table has the named trigger. The :description is optional, and if the schema is omitted, the table with which the trigger is associated must be visible in the search path.

hasnt_trigger()

SELECT hasnt_trigger( :schema, :table, :trigger, :description );
SELECT hasnt_trigger( :schema, :table, :trigger );
SELECT hasnt_trigger( :table, :trigger, :description );
SELECT hasnt_trigger( :table, :trigger )` ###

Parameters

:schema
Name of a schema in which to not find the trigger.
:table
Name of a table in which to not find the trigger.
:trigger
Name of an trigger.
:description
A short description of the test.

This function is the inverse of has_trigger(). The test passes if the specified trigger does not exist.

has_rule()

SELECT has_rule( :schema, :table, :rule, :description );
SELECT has_rule( :schema, :table, :rule );
SELECT has_rule( :table, :rule, :description );
SELECT has_rule( :table, :rule )` ###

Parameters

:schema
Name of a schema in which to find the rule.
:table
Name of a table in which to find the rule.
:rule
Name of an rule.
:description
A short description of the test.

Tests to see if the specified table has the named rule. The :description is optional, and if the schema is omitted, the table with which the rule is associated must be visible in the search path.

hasnt_rule()

SELECT hasnt_rule( :schema, :table, :rule, :description );
SELECT hasnt_rule( :schema, :table, :rule );
SELECT hasnt_rule( :table, :rule, :description );
SELECT hasnt_rule( :table, :rule )` ###

Parameters

:schema
Name of a schema in which to not find the rule.
:table
Name of a table in which to not find the rule.
:rule
Name of an rule.
:description
A short description of the test.

This function is the inverse of has_rule(). The test passes if the specified rule does not exist.

has_function()

SELECT has_function( :schema, :function, :args, :description );
SELECT has_function( :schema, :function, :args );
SELECT has_function( :schema, :function, :description );
SELECT has_function( :schema, :function );
SELECT has_function( :function, :args, :description );
SELECT has_function( :function, :args );
SELECT has_function( :function, :description );
SELECT has_function( :function );

Parameters

:schema
Name of a schema in which to find the function.
:function
Name of a function or procedure.
:args
Array of data types of the function arguments.
:description
A short description of the test.

Checks to be sure that the given function or procedure exists in the named schema and with the specified argument data types. If :schema is omitted, has_function() will search for the function in the schemas defined in the search path. If :args is omitted, has_function() will see if the function exists without regard to its arguments. Some examples:

SELECT has_function(
    'pg_catalog',
    'decode',
    ARRAY[ 'text', 'text' ],
    'Function decode(text, text) should exist'
);

SELECT has_function( 'do_something' );
SELECT has_function( 'do_something', ARRAY['int'] );
SELECT has_function( 'do_something', ARRAY['numeric'] );

If you wish to use the two-argument form of has_function(), specifying only the schema and the function name, you must cast the :function argument to :name in order to disambiguate it from from the has_function(:function, :description) form. If you neglect to do so, your results will be unexpected.

Also, if you use the string form to specify the :args array, be sure to cast it to name to disambiguate it from a text string:

SELECT has_function( 'lower', '{text}'::name[] );

Deprecation notice: The old name for this test function, can_ok(), is still available, but emits a warning when called. It will be removed in a future version of pgTAP.

hasnt_function()

SELECT hasnt_function( :schema, :function, :args, :description );
SELECT hasnt_function( :schema, :function, :args );
SELECT hasnt_function( :schema, :function, :description );
SELECT hasnt_function( :schema, :function );
SELECT hasnt_function( :function, :args, :description );
SELECT hasnt_function( :function, :args );
SELECT hasnt_function( :function, :description );
SELECT hasnt_function( :function );

Parameters

:schema
Name of a schema in which not to find the function.
:function
Name of a function or procedure.
:args
Array of data types of the function arguments.
:description
A short description of the test.

This function is the inverse of has_function(). The test passes if the specified function or procedure (optionally with the specified signature) does not exist.

has_cast()

SELECT has_cast( :source_type, :target_type, :schema, :function, :description );
SELECT has_cast( :source_type, :target_type, :schema, :function );
SELECT has_cast( :source_type, :target_type, :function, :description );
SELECT has_cast( :source_type, :target_type, :function );
SELECT has_cast( :source_type, :target_type, :description );
SELECT has_cast( :source_type, :target_type );

Parameters

:source_type
Data type of the source value without typemod.
:target_type
Data type of the target value without typemod.
:schema
Schema in which to find the operator function.
:function
Name of the operator function.
:description
A short description of the test.

Tests for the existence of a cast. A cast consists of a source data type, a target data type, and perhaps a (possibly schema-qualified) function. An example:

SELECT has_cast( 'integer', 'bigint', 'pg_catalog', 'int8' );

If you omit the description for the 3- or 4-argument version, you'll need to cast the function name to the NAME data type so that PostgreSQL doesn't resolve the function name as a description. For example:

SELECT has_cast( 'integer', 'bigint', 'int8'::NAME );

pgTAP will generate a useful description if you don't provide one.

Types can be defined by their canonical names or their aliases, e.g., character varying or varchar, so both these tests will pass:

SELECT has_cast( 'text', 'character varying' );
SELECT has_cast( 'text', 'varchar' );

Note that pgTAP ignores typemods, so either of these tests will pass:

SELECT has_cast( 'integer', 'bit(128)' );
SELECT has_cast( 'integer', 'bit' );

hasnt_cast()

SELECT hasnt_cast( :source_type, :target_type, :schema, :function, :description );
SELECT hasnt_cast( :source_type, :target_type, :schema, :function );
SELECT hasnt_cast( :source_type, :target_type, :function, :description );
SELECT hasnt_cast( :source_type, :target_type, :function );
SELECT hasnt_cast( :source_type, :target_type, :description );
SELECT hasnt_cast( :source_type, :target_type );

Parameters

:source_type
Data type of the source value.
:target_type
Data type of the target value.
:schema
Schema in which not to find the operator function.
:function
Name of the operator function.
:description
A short description of the test.

This function is the inverse of has_cast(): the test passes if the specified cast does not exist.

has_operator()

SELECT has_operator( :left_type, :schema, :name, :right_type, :return_type, :description );
SELECT has_operator( :left_type, :schema, :name, :right_type, :return_type );
SELECT has_operator( :left_type, :name, :right_type, :return_type, :description );
SELECT has_operator( :left_type, :name, :right_type, :return_type );
SELECT has_operator( :left_type, :name, :right_type, :description );
SELECT has_operator( :left_type, :name, :right_type );

Parameters

:left_type
Data type of the left operand.
:schema
Schema in which to find the operator.
:name
Name of the operator.
:right_type
Data type of the right operand.
:return_type
Data type of the return value.
:description
A short description of the test.

Tests for the presence of a binary operator. If the operator exists with the given schema, name, left and right arguments, and return value, the test will pass. If the operator does not exist, the test will fail. Example:

SELECT has_operator( 'integer', 'pg_catalog', '<=', 'integer', 'boolean' );

Types can be defined by their canonical names or their aliases, e.g., timestamp with time zone or timestamptz, or character varying or varchar.

If you omit the schema name, then the operator must be visible in the search path. If you omit the test description, pgTAP will generate a reasonable one for you. The return value is also optional. If you need to test for a left (prefix) or right (postfix) unary operator, use has_leftop() or has_rightop() instead.

hasnt_operator()

SELECT hasnt_operator( :left_type, :schema, :name, :right_type, :return_type, :description );
SELECT hasnt_operator( :left_type, :schema, :name, :right_type, :return_type );
SELECT hasnt_operator( :left_type, :name, :right_type, :return_type, :description );
SELECT hasnt_operator( :left_type, :name, :right_type, :return_type );
SELECT hasnt_operator( :left_type, :name, :right_type, :description );
SELECT hasnt_operator( :left_type, :name, :right_type );

Parameters

:left_type
Data type of the left operand.
:schema
Schema in which to find the operator.
:name
Name of the operator.
:right_type
Data type of the right operand.
:return_type
Data type of the return value.
:description
A short description of the test.

This function is the inverse of has_operator(). The test passes if the specified operator does not exist.

has_leftop()

SELECT has_leftop( :schema, :name, :type, :return_type, :description );
SELECT has_leftop( :schema, :name, :type, :return_type );
SELECT has_leftop( :name, :type, :return_type, :description );
SELECT has_leftop( :name, :type, :return_type );
SELECT has_leftop( :name, :type, :description );
SELECT has_leftop( :name, :type );

Parameters

:schema
Schema in which to find the operator.
:name
Name of the operator.
:type
Data type of the operand.
:return_type
Data type of the return value.
:description
A short description of the test.

Tests for the presence of a left-unary (prefix) operator. If the operator exists with the given schema, name, right argument, and return value, the test will fail. If the operator does not exist, the test will fail. Example:

SELECT has_leftop( 'pg_catalog', '!!', 'bigint', 'numeric' );

If you omit the schema name, then the operator must be visible in the search path. If you omit the test description, pgTAP will generate a reasonable one for you. The return type is also optional.

hasnt_leftop()

SELECT hasnt_leftop( :schema, :name, :type, :return_type, :description );
SELECT hasnt_leftop( :schema, :name, :type, :return_type );
SELECT hasnt_leftop( :name, :type, :return_type, :description );
SELECT hasnt_leftop( :name, :type, :return_type );
SELECT hasnt_leftop( :name, :type, :description );
SELECT hasnt_leftop( :name, :type );

Parameters

:schema
Schema in which to find the operator.
:name
Name of the operator.
:type
Data type of the operand.
:return_type
Data type of the return value.
:description
A short description of the test.

This function is the inverse of has_leftop(). The test passes if the specified operator does not exist.

has_rightop()

SELECT has_rightop( :schema, :name, :type, :return_type, :description );
SELECT has_rightop( :schema, :name, :type, :return_type );
SELECT has_rightop( :name, :type, :return_type, :description );
SELECT has_rightop( :name, :type, :return_type );
SELECT has_rightop( :name, :type, :description );
SELECT has_rightop( :name, :type );

Parameters

:schema
Schema in which to find the operator.
:name
Name of the operator.
:type
Data type of the operand.
:return_type
Data type of the return value.
:description
A short description of the test.

Tests for the presence of a right-unary (postfix) operator, supported through PostgreSQL 13. If the operator exists with the given left argument, schema, name, and return value, the test will fail. If the operator does not exist, the test will fail. Example:

SELECT has_rightop( 'bigint', 'pg_catalog', '!', 'numeric' );

If you omit the schema name, then the operator must be visible in the search path. If you omit the test description, pgTAP will generate a reasonable one for you. The return type is also optional.

hasnt_rightop()

SELECT hasnt_rightop( :schema, :name, :type, :return_type, :description );
SELECT hasnt_rightop( :schema, :name, :type, :return_type );
SELECT hasnt_rightop( :name, :type, :return_type, :description );
SELECT hasnt_rightop( :name, :type, :return_type );
SELECT hasnt_rightop( :name, :type, :description );
SELECT hasnt_rightop( :name, :type );

Parameters

:schema
Schema in which to find the operator.
:name
Name of the operator.
:type
Data type of the operand.
:return_type
Data type of the return value.
:description
A short description of the test.

This function is the inverse of hasnt_rightop(). The test passes if the specified operator does not exist.

has_opclass()

SELECT has_opclass( :schema, :name, :description );
SELECT has_opclass( :schema, :name );
SELECT has_opclass( :name, :description );
SELECT has_opclass( :name );

Parameters

:schema
Schema in which to find the operator class.
:name
Name of the operator class.
:description
A short description of the test.

Tests for the presence of an operator class. If you omit the schema name, then the operator must be visible in the search path. If you omit the test description, pgTAP will generate a reasonable one for you. The return value is also optional.

hasnt_opclass()

SELECT hasnt_opclass( :schema, :name, :description );
SELECT hasnt_opclass( :schema, :name );
SELECT hasnt_opclass( :name, :description );
SELECT hasnt_opclass( :name );

Parameters

:schema
Schema in which not to find the operator class.
:name
Name of the operator class.
:description
A short description of the test.

This function is the inverse of has_opclass(). The test passes if the specified operator class does not exist.

has_role()

SELECT has_role( :role, :description );
SELECT has_role( :role );

Parameters

:role
Name of the role.
:description
A short description of the test.

Checks to ensure that a database role exists. If the description is omitted, it will default to "Role :role should exist".

hasnt_role()

SELECT hasnt_role( :role, :description );
SELECT hasnt_role( :role );

Parameters

:role
Name of the role.
:description
A short description of the test.

The inverse of has_role(), this function tests for the absence of a database role.

has_user()

SELECT has_user( :user, :description );
SELECT has_user( :user );

Parameters

:user
Name of the user.
:description
A short description of the test.

Checks to ensure that a database user exists. If the description is omitted, it will default to "User :user should exist".

hasnt_user()

SELECT hasnt_user( :user, :description );
SELECT hasnt_user( :user );

Parameters

:user
Name of the user.
:description
A short description of the test.

The inverse of has_user(), this function tests for the absence of a database user.

has_group()

SELECT has_group( :group, :description );
SELECT has_group( :group );

Parameters

:group
Name of the group.
:description
A short description of the test.

Checks to ensure that a database group exists. If the description is omitted, it will default to "Group :group should exist".

hasnt_group()

SELECT hasnt_group( :group, :description );
SELECT hasnt_group( :group );

Parameters

:group
Name of the group.
:description
A short description of the test.

The inverse of has_group(), this function tests for the absence of a database group.

has_language()

SELECT has_language( :language, :description );
SELECT has_language( :language );

Parameters

:language
Name of the language.
:description
A short description of the test.

Checks to ensure that a procedural language exists. If the description is omitted, it will default to "Procedural language :language should exist".

hasnt_language()

SELECT hasnt_language( :language, :description );
SELECT hasnt_language( :language );

Parameters

:language
Name of the language.
:description
A short description of the test.

The inverse of has_language(), this function tests for the absence of a procedural language.

has_extension()

SELECT has_extension( :schema, :extension, :description );
SELECT has_extension( :schema, :extension );
SELECT has_extension( :extension, :description );
SELECT has_extension( :extension );

Parameters

:schema
Schema in which the extension's objects were installed.
:extension
Name of an extension.
:description
A short description of the test.

This function tests whether or not an extension exists in the database. The first argument is the schema in which the extension objects were installed, the second the extension name, and the third the test description. If the schema is omitted, the may be associated with any schema or no schema. If the test description is omitted, it will be set to "Extension :extension should exist". Example:

SELECT has_extension('public', 'pgtap');

hasnt_extension()

SELECT hasnt_extension( :schema, :extension, :description );
SELECT hasnt_extension( :schema, :extension );
SELECT hasnt_extension( :extension, :description );
SELECT hasnt_extension( :extension );

Parameters

:schema
Schema in which the extension's objects would be installed.
:extension
Name of an extension.
:description
A short description of the test.

This function is the inverse of has_extension(). The test passes if the specified extension does not exist.

Table For One

Okay, you're sure that your database has exactly the [right schema](#I+Object! "I Object!") and that all of the objects you need are there. So let's take a closer look at tables. There are a lot of ways to look at tables, to make sure that they have all the columns, indexes, constraints, keys, and indexes they need. So we have the assertions to validate 'em.

has_column()

SELECT has_column( :schema, :table, :column, :description );
SELECT has_column( :table, :column, :description );
SELECT has_column( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:description
A short description of the test.

Tests whether or not a column exists in a given table, view, materialized view or composite type. The first argument is the schema name, the second the table name, the third the column name, and the fourth is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Column :table.:column should exist".

hasnt_column()

SELECT hasnt_column( :schema, :table, :column, :description );
SELECT hasnt_column( :table, :column, :description );
SELECT hasnt_column( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:description
A short description of the test.

This function is the inverse of has_column(). The test passes if the specified column does not exist in the specified table, view, materialized view or composite type.

col_not_null()

SELECT col_not_null( :schema, :table, :column, :description );
SELECT col_not_null( :schema, :table, :column );
SELECT col_not_null( :table, :column, :description );
SELECT col_not_null( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:description
A short description of the test.

Tests whether the specified column has a NOT NULL constraint. The first argument is the schema name, the second the table name, the third the column name, and the fourth is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Column :table.:column should be NOT NULL". Note that this test will fail with a useful diagnostic message if the table or column in question does not exist. But use has_column() to make sure the column exists first, eh?

col_is_null()

SELECT col_is_null( :schema, :table, :column, :description );
SELECT col_is_null( :schema, :table, :column );
SELECT col_is_null( :table, :column, :description );
SELECT col_is_null( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:description
A short description of the test.

This function is the inverse of col_not_null(): the test passes if the column does not have a NOT NULL constraint. The first argument is the schema name, the second the table name, the third the column name, and the fourth is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Column :table.:column should allow NULL". Note that this test will fail with a useful diagnostic message if the table or column in question does not exist. But use has_column() to make sure the column exists first, eh?

col_has_default()

SELECT col_has_default( :schema, :table, :column, :description );
SELECT col_has_default( :table, :column, :description );
SELECT col_has_default( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:description
A short description of the test.

Tests whether or not a column has a default value. Fails if the column doesn't have a default value. It will also fail if the column doesn't exist, and emit useful diagnostics to let you know:

# Failed test 136: "desc"
#     Column public.sometab.__asdfasdfs__ does not exist

col_hasnt_default()

SELECT col_hasnt_default( :schema, :table, :column, :description );
SELECT col_hasnt_default( :table, :column, :description );
SELECT col_hasnt_default( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:description
A short description of the test.

This function is the inverse of col_has_default(). The test passes if the specified column does not have a default. It will still fail if the column does not exist, and emit useful diagnostics to let you know.

col_type_is()

SELECT col_type_is( :schema, :table, :column, :type_schema, :type, :description );
SELECT col_type_is( :schema, :table, :column, :type_schema, :type );
SELECT col_type_is( :schema, :table, :column, :type, :description );
SELECT col_type_is( :schema, :table, :column, :type );
SELECT col_type_is( :table, :column, :type, :description );
SELECT col_type_is( :table, :column, :type );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:type_schema
Schema in which to find the data type.
:type
Name of a data type.
:description
A short description of the test.

This function tests that the specified column is of a particular type. If it fails, it will emit diagnostics naming the actual type. The first argument is the schema name, the second the table name, the third the column name, the fourth the type's schema, the fifth the type, and the sixth is the test description.

If the table schema is omitted, the table must be visible in the search path. If the type schema is omitted, it must be visible in the search path. The schema can optionally be included in the :type argument, e.g., "contrib.citext".

If the test description is omitted, it will be set to "Column :schema.:table.:column should be type :schema.:type". Note that this test will fail if the table or column in question does not exist.

The type argument may be formatted using the full name of the type or any supported alias. For example, if you created a varchar(64) column, you can pass the type as either "varchar(64)" or "character varying(64)". Same deal for timestamps, as in this example:

SELECT col_type_is( 'myschema', 'sometable', 'somecolumn', 'timestamptz(3)' );

The exception to this rule is interval types prior to Postgres 17, which must be specified as rendered by PostgreSQL itself:

SELECT col_type_is( 'myschema', 'sometable', 'somecolumn', 'interval second(3)' );

Types with case-sensitive names or special characters must be double-quoted:

SELECT col_type_is( 'myschema', 'sometable', 'somecolumn', '"myType"' );

If the test fails, it will output useful diagnostics. For example this test:

SELECT col_type_is( 'pg_catalog', 'pg_type', 'typname', 'text' );

Will produce something like this:

# Failed test 138: "Column pg_catalog.pg_type.typname should be type text"
#         have: name
#         want: text

It will even tell you if the test fails because a column doesn't exist or if the type doesn't exist. But use has_column() to make sure the column exists first, eh?

col_default_is()

SELECT col_default_is( :schema, :table, :column, :default, :description );
SELECT col_default_is( :table, :column, :default, :description );
SELECT col_default_is( :table, :column, :default );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:column
Name of the column.
:default
Default value expressed as a string.
:description
A short description of the test.

Tests the default value of a column. If it fails, it will emit diagnostics showing the actual default value. The first argument is the schema name, the second the table name, the third the column name, the fourth the default value, and the fifth is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Column :table.:column should default to :default". Note that this test will fail if the table or column in question does not exist.

The default argument must have an unambiguous type in order for the call to succeed. If you see an error such as 'ERROR: could not determine polymorphic type because input has type "unknown"', it's because you forgot to cast the expected value, probably a NULL, to its proper type. IOW, this will fail:

SELECT col_default_is( 'tab', age, NULL );

But this will not:

SELECT col_default_is( 'tab', age, NULL::integer );

You can also test for functional defaults. Just specify the function call as a string:

SELECT col_default_is( 'user', 'created_at', 'now()' );

But beware that the representation of special SQL syntax functions changed in PostgreSQL 10. Where previously a default of CURRENT_USER and friends used to be represented as functions:

SELECT col_default_is( 'widgets', 'created_by', '"current_user"()' );

As of PostgreSQL 10, they comply with the SQL spec to appear in uppercase and without trailining parentheses:

SELECT col_default_is( 'widgets', 'created_by', 'CURRENT_USER' );

If you need to support both variants, use pg_version_num() to decide which to use:

SELECT col_default_is(
    'widgets', 'created_by',
    CASE WHEN pg_version_num() >= 100000 THEN 'CURRENT_USER' ELSE '"current_user"()' END
);

See the note in the System Information Functions documentation for a complete list.

If the test fails, it will output useful diagnostics. For example, this test:

SELECT col_default_is(
    'pg_catalog',
    'pg_type',
    'typname',
    'foo',
    'check typname'
);

Will produce something like this:

# Failed test 152: "check typname"
#         have: NULL
#         want: foo

And if the test fails because the table or column in question does not exist, the diagnostics will tell you that, too. But you use has_column() and col_has_default() to test those conditions before you call col_default_is(), right? Right??? Yeah, good, I thought so.

has_pk()

SELECT has_pk( :schema, :table, :description );
SELECT has_pk( :schema, :table );
SELECT has_pk( :table, :description );
SELECT has_pk( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

Tests whether or not a table has a primary key. The first argument is the schema name, the second the table name, the the third is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Table :table should have a primary key". Note that this test will fail if the table in question does not exist.

If you find that the function call confuses the table name for a description, cast the table to the NAME type:

SELECT has_pk( 'myschema', 'mytable'::name );

hasnt_pk()

SELECT hasnt_pk( :schema, :table, :description );
SELECT hasnt_pk( :table, :description );
SELECT hasnt_pk( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

This function is the inverse of has_pk(). The test passes if the specified primary key does not exist.

has_fk()

SELECT has_fk( :schema, :table, :description );
SELECT has_fk( :table, :description );
SELECT has_fk( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

Tests whether or not a table has a foreign key constraint. The first argument is the schema name, the second the table name, the the third is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Table :table should have a foreign key constraint". Note that this test will fail if the table in question does not exist.

hasnt_fk()

SELECT hasnt_fk( :schema, :table, :description );
SELECT hasnt_fk( :table, :description );
SELECT hasnt_fk( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

This function is the inverse of has_fk(). The test passes if the specified foreign key does not exist.

col_is_pk()

SELECT col_is_pk( :schema, :table, :columns, :description );
SELECT col_is_pk( :schema, :table, :column, :description );
SELECT col_is_pk( :schema, :table, :columns );
SELECT col_is_pk( :schema, :table, :column );
SELECT col_is_pk( :table, :columns, :description );
SELECT col_is_pk( :table, :column, :description );
SELECT col_is_pk( :table, :columns );
SELECT col_is_pk( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the primary key.
:columns
Array of the names of the primary key columns.
:column
Name of the primary key column.
:description
A short description of the test.

Tests whether the specified column or columns in a table is/are the primary key for that table. If it fails, it will emit diagnostics showing the actual primary key columns, if any. The first argument is the schema name, the second the table name, the third the column name or an array of column names, and the fourth is the test description. Examples:

SELECT col_is_pk( 'myschema', 'sometable', 'id' );
SELECT col_is_pk( 'persons',  ARRAY['given_name', 'surname'] );

If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Column :table(:column) should be a primary key". Note that this test will fail if the table or column in question does not exist.

If the test fails, it will output useful diagnostics. For example this test:

SELECT col_is_pk( 'pg_type', 'id' );

Will produce something like this:

# Failed test 178: "Column pg_type.id should be a primary key"
#         have: {}
#         want: {id}

col_isnt_pk()

SELECT col_isnt_pk( :schema, :table, :columns, :description );
SELECT col_isnt_pk( :schema, :table, :column, :description );
SELECT col_isnt_pk( :table, :columns, :description );
SELECT col_isnt_pk( :table, :column, :description );
SELECT col_isnt_pk( :table, :columns );
SELECT col_isnt_pk( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table not containing the primary key.
:columns
Array of the names of the primary key columns.
:column
Name of the primary key column.
:description
A short description of the test.

This function is the inverse of col_is_pk(). The test passes if the specified column or columns are not a primary key.

col_is_fk()

SELECT col_is_fk( :schema, :table, :columns, :description );
SELECT col_is_fk( :schema, :table, :column, :description );
SELECT col_is_fk( :table, :columns, :description );
SELECT col_is_fk( :table, :column, :description );
SELECT col_is_fk( :table, :columns );
SELECT col_is_fk( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the foreign key constraint.
:columns
Array of the names of the foreign key columns.
:column
Name of the foreign key column.
:description
A short description of the test.

Just like col_is_fk(), except that it test that the column or array of columns are a primary key. The diagnostics on failure are a bit different, too. Since the table might have more than one foreign key, the diagnostics simply list all of the foreign key constraint columns, like so:

#    Table widget has foreign key constraints on these columns:
#        {thingy_id}
#        {surname,given_name}

col_isnt_fk()

SELECT col_isnt_fk( :schema, :table, :columns, :description );
SELECT col_isnt_fk( :schema, :table, :column, :description );
SELECT col_isnt_fk( :table, :columns, :description );
SELECT col_isnt_fk( :table, :column, :description );
SELECT col_isnt_fk( :table, :columns );
SELECT col_isnt_fk( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table not containing the foreign key constraint.
:columns
Array of the names of the foreign key columns.
:column
Name of the foreign key column.
:description
A short description of the test.

This function is the inverse of col_is_fk(). The test passes if the specified column or columns are not a foreign key.

fk_ok()

SELECT fk_ok( :fk_schema, :fk_table,   :fk_columns, :pk_schema,  :pk_table, :pk_columns, :description );
SELECT fk_ok( :fk_schema, :fk_table,   :fk_columns, :pk_schema,  :pk_table, :pk_columns );
SELECT fk_ok( :fk_table,  :fk_columns, :pk_table,   :pk_columns, :description );
SELECT fk_ok( :fk_table,  :fk_columns, :pk_table,   :pk_columns );
SELECT fk_ok( :fk_schema, :fk_table,   :fk_column,  :pk_schema,  :pk_table, :pk_column,  :description );
SELECT fk_ok( :fk_schema, :fk_table,   :fk_column,  :pk_schema,  :pk_table, :pk_column );
SELECT fk_ok( :fk_table,  :fk_column,  :pk_table,   :pk_column,  :description );
SELECT fk_ok( :fk_table,  :fk_column,  :pk_table,   :pk_column );

Parameters

:fk_schema
Schema in which to find the table with the foreign key
:fk_table
Name of a table containing the foreign key.
:fk_columns
Array of the names of the foreign key columns.
:fk_column
Name of the foreign key column.
:pk_schema
Schema in which to find the table with the primary key
:pk_table
Name of a table containing the primary key.
:pk_columns
Array of the names of the primary key columns.
:pk_column
Name of the primary key column.
:description
A short description of the test.

This function combines col_is_fk() and col_is_pk() into a single test that also happens to determine that there is in fact a foreign key relationship between the foreign and primary key tables. To properly test your relationships, this should be your main test function of choice.

The first three arguments are the schema, table, and column or array of columns that constitute the foreign key constraint. The schema name is optional, and the columns can be specified as a string for a single column or an array of strings for multiple columns. The next three arguments are the schema, table, and column or columns that constitute the corresponding primary key. Again, the schema is optional and the columns may be a string or array of strings (though of course it should have the same number of elements as the foreign key column argument). The seventh argument is an optional description If it's not included, it will be set to :fk_schema.:fk_table(:fk_column) should reference :pk_column.pk_table(:pk_column). Some examples:

SELECT fk_ok( 'myschema', 'sometable', 'big_id', 'myschema', 'bigtable', 'id' );
SELECT fk_ok(
    'contacts',
    ARRAY['person_given_name', 'person_surname'],
    'persons',
    ARRAY['given_name', 'surname'],
);

To test constraints in a temporary table (for example, after running a function that's expected to create one), either omit the schema names or use pg_my_temp_schema()::regnamespace::name (on PostgreSQL 9.5 and higher) or (SELECT nspname FROM pg_namespace WHERE oid = pg_my_temp_schema()) (on PostgreSQL 9.4 and lower) to specify the temporary schema name. For example:

SELECT fk_ok(
    pg_my_temp_schema()::regnamespace::name, 'tmpa', 'id',
    pg_my_temp_schema()::regnamespace::name, 'tmpb', 'id'
);

If the test fails, it will output useful diagnostics. For example this test:

SELECT fk_ok( 'contacts', 'person_id', 'persons', 'id' );

Will produce something like this:

# Failed test 178: "Column contacts(person_id) should reference persons(id)"
#         have: contacts(person_id) REFERENCES persons(id)"
#         want: contacts(person_nick) REFERENCES persons(nick)"

has_unique()

SELECT has_unique( :schema, :table, :description );
SELECT has_unique( :table, :description );
SELECT has_unique( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the unique constraint.
:description
A short description of the test.

Tests whether or not a table has a unique constraint. The first argument is the schema name, the second the table name, the the third is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Table :table should have a unique constraint". Note that this test will fail if the table in question does not exist.

col_is_unique()

SELECT col_is_unique( schema, table, columns, description );
SELECT col_is_unique( schema, table, column, description );
SELECT col_is_unique( schema, table, columns );
SELECT col_is_unique( schema, table, column );
SELECT col_is_unique( table, columns, description );
SELECT col_is_unique( table, column, description );
SELECT col_is_unique( table, columns );
SELECT col_is_unique( table, column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the unique constraint.
:columns
Array of the names of the unique columns.
:column
Name of the unique column.
:description
A short description of the test.

Just like col_is_pk(), except that it test that the column or array of columns have a unique constraint on them. Examples:

SELECT col_is_unique( 'contacts', ARRAY['given_name', 'surname'] );
SELECT col_is_unique(
    'myschema', 'sometable', 'other_id',
    'myschema.sometable.other_id should be unique'
);

If you omit the description for the 3-argument version, you'll need to cast the table and column parameters to the NAME data type so that PostgreSQL doesn't resolve the function name as a description. For example:

SELECT col_is_unique( 'myschema', 'sometable'::name, 'other_id'::name );

In the event of failure, the diagnostics will list the unique constraints that were actually found, if any:

Failed test 40: "users.email should be unique"
        have: {username}
              {first_name,last_name}
        want: {email}

has_check()

SELECT has_check( :schema, :table, :description );
SELECT has_check( :table, :description );
SELECT has_check( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the check constraint.
:description
A short description of the test.

Tests whether or not a table has a check constraint. The first argument is the schema name, the second the table name, the the third is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Table :table should have a check constraint". Note that this test will fail if the table in question does not exist.

In the event of failure, the diagnostics will list the columns on the table that do have check constraints, if any:

Failed test 41: "users.email should have a check constraint"
        have: {username}
        want: {email}

col_has_check()

SELECT col_has_check( :schema, :table, :columns, :description );
SELECT col_has_check( :schema, :table, :column, :description );
SELECT col_has_check( :table, :columns, :description );
SELECT col_has_check( :table, :column, :description );
SELECT col_has_check( :table, :columns );
SELECT col_has_check( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the check constraint.
:columns
Array of the names of the check constraint columns.
:column
Name of the check constraint column.
:description
A short description of the test.

Just like col_is_pk(), except that it test that the column or array of columns have a check constraint on them.

index_is_unique()

SELECT index_is_unique( :schema, :table, :index, :description );
SELECT index_is_unique( :schema, :table, :index );
SELECT index_is_unique( :table, :index );
SELECT index_is_unique( :index );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the index.
:index
Name of the index.
:description
A short description of the test.

Tests whether an index is unique.

index_is_primary()

SELECT index_is_primary( :schema, :table, :index, :description );
SELECT index_is_primary( :schema, :table, :index );
SELECT index_is_primary( :table, :index );
SELECT index_is_primary( :index );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the index.
:index
Name of the index.
:description
A short description of the test.

Tests whether an index is on a primary key.

is_partitioned()

SELECT is_partitioned( :schema, :table, :description );
SELECT is_partitioned( :schema, :table );
SELECT is_partitioned( :table, :description);
SELECT is_partitioned( :table );

Parameters

:schema
Schema in which to find the partitioned table.
:table
Name of a partitioned table.
:description
A short description of the test.

Tests whether a table is partitioned. The first argument is the schema name, the second the table name, the the third is the test description. If the schema is omitted, the table must be visible in the search path. If the test description is omitted, it will be set to "Table :table should be partitioned". Note that this test will fail if the table in question does not exist.

isnt_partitioned()

SELECT isnt_partitioned( :schema, :table, :description );
SELECT isnt_partitioned( :schema, :table );
SELECT isnt_partitioned( :table, :description);
SELECT isnt_partitioned( :table );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table.
:description
A short description of the test.

This function is the inverse of is_partitioned(). The test passes if the specified table is not partitioned, or if it does not exist.

is_partition_of()

SELECT is_parent( :child_schema, :child, :parent_schema, :parent_table, :description );
SELECT is_parent( :child_schema, :child, :parent_schema, :parent_table );
SELECT is_parent( :child, :parent_table, :description );
SELECT is_parent( :child, :parent_table );

Parameters

:child_schema
Schema in which to find the partition table.
:child
Name of a partition table.
:parent_schema
Schema in which to find the partitioned table.
:parent_table
Name of a partitioned table.
:description
A short description of the test.

Tests that one table is a partition of another table. The partition (or child) table is specified first, the partitioned (or parent) table second. Without the schema parameters, both tables must be visible in the search path. If the test description is omitted, it will be set to "Table :child_table should be a partition of :parent_table". Note that this test will fail if either table does not exist.

is_clustered()

SELECT is_clustered( :schema, :table, :index, :description );
SELECT is_clustered( :schema, :table, :index );
SELECT is_clustered( :table, :index );
SELECT is_clustered( :index );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the index.
:index
Name of the index.
:description
A short description of the test.

Tests whether a table is clustered on the given index. A table is clustered on an index when the SQL command CLUSTER TABLE INDEXNAME has been executed. Clustering reorganizes the table tuples so that they are stored on disk in the order defined by the index.

is_indexed()

SELECT is_indexed( :schema, :table, :columns, :description );
SELECT is_indexed( :schema, :table, :columns );
SELECT is_indexed( :table, :columns, :description );
SELECT is_indexed( :table, :columns );
SELECT is_indexed( :schema, :table, :column, :description );
SELECT is_indexed( :schema, :table, :column );
SELECT is_indexed( :table, :column, :description );
SELECT is_indexed( :table, :column );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the index.
:columns
Array of the columns and/or expressions in the index.
:column
Indexed column name or expression.
:description
A short description of the test.

Checks that the specified columns or expressions are contained in a single index on the named table. Effectively like has_index() except that it doesn't require an index name and does require one or more column names or expressions in the defined for the index.

Note that unlike most other column parameter arguments in pgTAP, mixed-case column mames crated with double-quotes must be double-quoted when passed to is_indexed(), like so:

SELECT is_indexed( 'widgets', '"Name"' );

This caveat applies only to column names, not to table and schema names, which should omit double-quoting.

index_is_type()

SELECT index_is_type( :schema, :table, :index, :type, :description );
SELECT index_is_type( :schema, :table, :index, :type );
SELECT index_is_type( :table, :index, :type );
SELECT index_is_type( :index, :type );

Parameters

:schema
Schema in which to find the table.
:table
Name of a table containing the index.
:index
Name of the index.
:type
The index Type.
:description
A short description of the test.

Tests to ensure that an index is of a particular type. At the time of this writing, the supported types are:

  • btree
  • hash
  • gist
  • gin

If the test fails, it will emit a diagnostic message with the actual index type, like so:

# Failed test 175: "Index idx_bar should be a hash index"
#         have: btree
#         want: hash

Feeling Funky

Perhaps more important than testing the database schema is testing your custom functions. Especially if you write functions that provide the interface for clients to interact with the database, making sure that they work will save you time in the long run. So use these assertions to save yourself heartache in the future.

can()

SELECT can( :schema, :functions, :description );
SELECT can( :schema, :functions );
SELECT can( :functions, :description );
SELECT can( :functions );

Parameters

:schema
Schema in which to find the functions.
:functions
Array of function and/or procedure names.
:description
A short description of the test.

Checks to be sure that :schema has :functions defined. This is subtly different from functions_are(). functions_are() fails if the functions defined in :schema are not exactly the functions defined in :functions. can(), on the other hand, just makes sure that :functions exist.

If :schema is omitted, then can() will look for functions defined in schemas defined in the search path. No matter how many functions are listed in :functions, a single call to can() counts as one test. If you want otherwise, call can() once for each function --- or better yet, use has_function(). Example:

SELECT can( 'pg_catalog', ARRAY['upper', 'lower'] );

If any of the functions are not defined, the test will fail and the diagnostics will output a list of the functions that are missing, like so:

# Failed test 52: "Schema pg_catalog can"
#     pg_catalog.foo() missing
#     pg_catalog.bar() missing

function_lang_is()

SELECT function_lang_is( :schema, :function, :args, :language, :description );
SELECT function_lang_is( :schema, :function, :args, :language );
SELECT function_lang_is( :schema, :function, :language, :description );
SELECT function_lang_is( :schema, :function, :language );
SELECT function_lang_is( :function, :args, :language, :description );
SELECT function_lang_is( :function, :args, :language );
SELECT function_lang_is( :function, :language, :description );
SELECT function_lang_is( :function, :language );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:language
Name of the procedural language.
:description
A short description of the test.

Tests that a particular function is implemented in a particular procedural language. The function name is required. If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Examples:

SELECT function_lang_is( 'myschema', 'foo',  ARRAY['integer', 'text'], 'plperl' );
SELECT function_lang_is( 'do_something', 'sql' );
SELECT function_lang_is( 'do_something', ARRAY['integer'], 'plpgsql' );
SELECT function_lang_is( 'do_something', ARRAY['numeric'], 'plpgsql' );

In the event of a failure, you'll useful diagnostics will tell you what went wrong, for example:

# Failed test 211: "Function mychema.eat(integer, text) should be written in perl"
#         have: plpgsql
#         want: perl

If the function does not exist, you'll be told that, too.

# Failed test 212: "Function myschema.grab() should be written in sql"
#     Function myschema.grab() does not exist

But then you check with has_function() first, right?

function_returns()

SELECT function_returns( :schema, :function, :args, :type, :description );
SELECT function_returns( :schema, :function, :args, :type );
SELECT function_returns( :schema, :function, :type, :description );
SELECT function_returns( :schema, :function, :type );
SELECT function_returns( :function, :args, :type, :description );
SELECT function_returns( :function, :args, :type );
SELECT function_returns( :function, :type, :description );
SELECT function_returns( :function, :type );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:type
Return value data type.
:description
A short description of the test.

Tests that a particular function returns a particular data type. The :type argument may be formatted with full or aliased type names, e.g., integer, int4, or int. For set returning functions, the :type argument should start with "setof " (yes, lowercase). Examples:

SELECT function_returns( 'myschema', 'foo', ARRAY['int', 'text'], 'integer' );
SELECT function_returns( 'do_something', 'setof boolean' );
SELECT function_returns( 'do_something', ARRAY['integer'], 'boolean' );
SELECT function_returns( 'do_something', ARRAY['numeric'], 'numeric' );

If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created.

Procedures can also be tested; they always return void:

SELECT function_returns( 'my_proc', 'void' );

In the event of a failure, you'll useful diagnostics will tell you what went wrong, for example:

# Failed test 283: "Function oww(integer, text) should return integer"
#         have: bool
#         want: integer

If the function does not exist, you'll be told that, too.

# Failed test 284: "Function oui(integer, text) should return integer"
#     Function oui(integer, text) does not exist

But then you check with has_function() first, right?

is_definer()

SELECT is_definer( :schema, :function, :args, :description );
SELECT is_definer( :schema, :function, :args );
SELECT is_definer( :schema, :function, :description );
SELECT is_definer( :schema, :function );
SELECT is_definer( :function, :args, :description );
SELECT is_definer( :function, :args );
SELECT is_definer( :function, :description );
SELECT is_definer( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function or proceudure name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

Tests that a function or procedure is a security definer (i.e., a "setuid" function). If the :schema argument is omitted, then the function must be visible in the search path. If the :args argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Examples:

SELECT is_definer( 'myschema', 'foo', ARRAY['integer', 'text'] );
SELECT is_definer( 'do_something' );
SELECT is_definer( 'do_something', ARRAY['integer'] );
SELECT is_definer( 'do_something', ARRAY['numeric'] );

If the function does not exist, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be security definer"
#     Function nasty() does not exist

But then you check with has_function() first, right?

isnt_definer()

SELECT isnt_definer( :schema, :function, :args, :description );
SELECT isnt_definer( :schema, :function, :args );
SELECT isnt_definer( :schema, :function, :description );
SELECT isnt_definer( :schema, :function );
SELECT isnt_definer( :function, :args, :description );
SELECT isnt_definer( :function, :args );
SELECT isnt_definer( :function, :description );
SELECT isnt_definer( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function or proceure name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

This function is the inverse of is_definer(). The test passes if the specified function or procedure is not a security definer.

If the function does not exist, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should not be security definer"
#     Function nasty() does not exist

But then you check with has_function() first, right?

is_strict()

SELECT is_strict( :schema, :function, :args, :description );
SELECT is_strict( :schema, :function, :args );
SELECT is_strict( :schema, :function, :description );
SELECT is_strict( :schema, :function );
SELECT is_strict( :function, :args, :description );
SELECT is_strict( :function, :args );
SELECT is_strict( :function, :description );
SELECT is_strict( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

Tests that a function is a strict, meaning that the function returns null if any argument is null. If the :schema argument is omitted, then the function must be visible in the search path. If the :args argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Examples:

SELECT is_strict( 'myschema', 'foo', ARRAY['integer', 'text'] );
SELECT is_strict( 'do_something' );
SELECT is_strict( 'do_something', ARRAY['integer'] );
SELECT is_strict( 'do_something', ARRAY['numeric'] );

If the function does not exist, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be strict"
#     Function nasty() does not exist

But then you check with has_function() first, right?

isnt_strict()

SELECT isnt_strict( :schema, :function, :args, :description );
SELECT isnt_strict( :schema, :function, :args );
SELECT isnt_strict( :schema, :function, :description );
SELECT isnt_strict( :schema, :function );
SELECT isnt_strict( :function, :args, :description );
SELECT isnt_strict( :function, :args );
SELECT isnt_strict( :function, :description );
SELECT isnt_strict( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

This function is the inverse of is_strict(). The test passes if the specified function is not strict.

If the function does not exist, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be an aggregate function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

is_normal_function()

SELECT is_normal_function( :schema, :function, :args, :description );
SELECT is_normal_function( :schema, :function, :args );
SELECT is_normal_function( :schema, :function, :description );
SELECT is_normal_function( :schema, :function );
SELECT is_normal_function( :function, :args, :description );
SELECT is_normal_function( :function, :args );
SELECT is_normal_function( :function, :description );
SELECT is_normal_function( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

Tests that a function is a normal function --- that is, not an aggregate, window, or procedural function. If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Fails if the function is not a normal function or if the function does not exist. Examples:

SELECT is_normal_function( 'myschema', 'foo',  ARRAY['integer', 'text'] );
SELECT is_normal_function( 'do_something' );
SELECT is_normal_function( 'do_something', ARRAY['integer'] );
SELECT is_normal_function( 'do_something', ARRAY['numeric'] );

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be a normal function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

isnt_normal_function()

SELECT isnt_normal_function( :schema, :function, :args, :description );
SELECT isnt_normal_function( :schema, :function, :args );
SELECT isnt_normal_function( :schema, :function, :description );
SELECT isnt_normal_function( :schema, :function );
SELECT isnt_normal_function( :function, :args, :description );
SELECT isnt_normal_function( :function, :args );
SELECT isnt_normal_function( :function, :description );
SELECT isnt_normal_function( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

This function is the inverse of is_normal_function(). The test passes if the specified function exists and is not a normal function.

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should not be a normal function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

is_aggregate()

SELECT is_aggregate( :schema, :function, :args, :description );
SELECT is_aggregate( :schema, :function, :args );
SELECT is_aggregate( :schema, :function, :description );
SELECT is_aggregate( :schema, :function );
SELECT is_aggregate( :function, :args, :description );
SELECT is_aggregate( :function, :args );
SELECT is_aggregate( :function, :description );
SELECT is_aggregate( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

Tests that a function is an aggregate function. If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Fails if the function is not an aggregate function, or if the function does not exist. Examples:

SELECT is_aggregate( 'myschema', 'foo',  ARRAY['integer', 'text'] );
SELECT is_aggregate( 'do_something' );
SELECT is_aggregate( 'do_something', ARRAY['integer'] );
SELECT is_aggregate( 'do_something', ARRAY['numeric'] );

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be an aggregate function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

isnt_aggregate()

SELECT isnt_aggregate( :schema, :function, :args, :description );
SELECT isnt_aggregate( :schema, :function, :args );
SELECT isnt_aggregate( :schema, :function, :description );
SELECT isnt_aggregate( :schema, :function );
SELECT isnt_aggregate( :function, :args, :description );
SELECT isnt_aggregate( :function, :args );
SELECT isnt_aggregate( :function, :description );
SELECT isnt_aggregate( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

This function is the inverse of is_aggregate(). The test passes if the specified function exists and is not an aggregate function.

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should not be an aggregate function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

is_window()

SELECT is_window( :schema, :function, :args, :description );
SELECT is_window( :schema, :function, :args );
SELECT is_window( :schema, :function, :description );
SELECT is_window( :schema, :function );
SELECT is_window( :function, :args, :description );
SELECT is_window( :function, :args );
SELECT is_window( :function, :description );
SELECT is_window( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

Tests that a function is a window function. If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Fails if the function is not a window function or if the function does not exist. Examples:

SELECT is_window( 'myschema', 'foo',  ARRAY['integer', 'text'] );
SELECT is_window( 'do_something' );
SELECT is_window( 'do_something', ARRAY['integer'] );
SELECT is_window( 'do_something', ARRAY['numeric'] );

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be a window function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

isnt_window()

SELECT isnt_window( :schema, :function, :args, :description );
SELECT isnt_window( :schema, :function, :args );
SELECT isnt_window( :schema, :function, :description );
SELECT isnt_window( :schema, :function );
SELECT isnt_window( :function, :args, :description );
SELECT isnt_window( :function, :args );
SELECT isnt_window( :function, :description );
SELECT isnt_window( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

This function is the inverse of is_window(). The test passes if the specified function exists and is not a window function.

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should not be a window function"
#     Function nasty() does not exist

But then you check with has_function() first, right?

is_procedure()

SELECT is_procedure( :schema, :function, :args, :description );
SELECT is_procedure( :schema, :function, :args );
SELECT is_procedure( :schema, :function, :description );
SELECT is_procedure( :schema, :function );
SELECT is_procedure( :function, :args, :description );
SELECT is_procedure( :function, :args );
SELECT is_procedure( :function, :description );
SELECT is_procedure( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

Tests that a function is a procedural function. If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Fails if the function is not a procedure or if the function does not exist. Examples:

SELECT is_procedure( 'myschema', 'foo',  ARRAY['integer', 'text'] );
SELECT is_procedure( 'do_something' );
SELECT is_procedure( 'do_something', ARRAY['integer'] );
SELECT is_procedure( 'do_something', ARRAY['numeric'] );

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should be a procedure"
#     Function nasty() does not exist

But then you check with has_function() first, right?

isnt_procedure()

SELECT isnt_procedure( :schema, :function, :args, :description );
SELECT isnt_procedure( :schema, :function, :args );
SELECT isnt_procedure( :schema, :function, :description );
SELECT isnt_procedure( :schema, :function );
SELECT isnt_procedure( :function, :args, :description );
SELECT isnt_procedure( :function, :args );
SELECT isnt_procedure( :function, :description );
SELECT isnt_procedure( :function );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:description
A short description of the test.

This function is the inverse of is_procedure(). The test passes if the specified function exists and is not a procedure.

If no such function exists, a handy diagnostic message will let you know:

# Failed test 290: "Function nasty() should not be a procedure"
#     Function nasty() does not exist

But then you check with has_function() first, right?

volatility_is()

SELECT volatility_is( :schema, :function, :args, :volatility, :description );
SELECT volatility_is( :schema, :function, :args, :volatility );
SELECT volatility_is( :schema, :function, :volatility, :description );
SELECT volatility_is( :schema, :function, :volatility );
SELECT volatility_is( :function, :args, :volatility, :description );
SELECT volatility_is( :function, :args, :volatility );
SELECT volatility_is( :function, :volatility, :description );
SELECT volatility_is( :function, :volatility );

Parameters

:schema
Schema in which to find the function.
:function
Function name.
:args
Array of data types for the function arguments.
:volatility
Volatility level.
:description
A short description of the test.

Tests the volatility of a function. Supported volatilities are "volatile", "stable", and "immutable". Consult the CREATE FUNCTION documentation for details. The function name is required. If the :schema argument is omitted, then the function must be visible in the search path. If the :args[] argument is passed, then the function with that argument signature will be the one tested; otherwise, a function with any signature will be checked (pass an empty array to specify a function with an empty signature). If the :description is omitted, a reasonable substitute will be created. Examples:

SELECT volatility_is( 'myschema', 'foo',  ARRAY['integer', 'text'], 'stable' );
SELECT volatility_is( 'do_something', 'immutable' );
SELECT volatility_is( 'do_something', ARRAY['integer'], 'stable' );
SELECT volatility_is( 'do_something', ARRAY['numeric'], 'volatile' );

In the event of a failure, you'll useful diagnostics will tell you what went wrong, for example:

# Failed test 211: "Function mychema.eat(integer, text) should be IMMUTABLE"
#         have: VOLATILE
#         want: IMMUTABLE

If the function does not exist, you'll be told that, too.

# Failed test 212: "Function myschema.grab() should be IMMUTABLE"
#     Function myschema.grab() does not exist

But then you check with has_function() first, right?

trigger_is()

SELECT trigger_is( :schema, :table, :trigger, :func_schema, :function, :description );
SELECT trigger_is( :schema, :table, :trigger, :func_schema, :function );
SELECT trigger_is( :table, :trigger, :function, :description );
SELECT trigger_is( :table, :trigger, :function );

Parameters

:schema
Schema in which to find the table.
:table
Table in which to find the trigger.
:trigger
Trigger name.
:func_schema
Schema in which to find the trigger function.
:function
Function name.
:description
A short description of the test.

Tests that the specified trigger calls the named function. If not, it outputs a useful diagnostic:

# Failed test 31: "Trigger set_users_pass should call hash_password()"
#         have: hash_pass
#         want: hash_password

Database Deets

Tables and functions aren't the only objects in the database, as you well know. These assertions close the gap by letting you test the attributes of other database objects.

language_is_trusted()

SELECT language_is_trusted( language, description );
SELECT language_is_trusted( language );

Parameters

:language
Name of a procedural language.
:description
A short description of the test.

Tests that the specified procedural language is trusted. See the [CREATE LANGUAGE](https://www.postgresql.org/docs/current/static/sql-createlanguage.html "CREATE LANGUAGE") documentation for details on trusted and untrusted procedural languages. If the :description argument is not passed, a suitably useful default will be created.

In the event that the language in question does not exist in the database, language_is_trusted() will emit a diagnostic message to alert you to this fact, like so:

# Failed test 523: "Procedural language plomgwtf should be trusted"
#     Procedural language plomgwtf does not exist

But you really ought to call has_language() first so that you never get that far.

enum_has_labels()

SELECT enum_has_labels( :schema, :enum, :labels, :description );
SELECT enum_has_labels( :schema, :enum, :labels );
SELECT enum_has_labels( :enum, :labels, :description );
SELECT enum_has_labels( :enum, :labels );

Parameters

:schema
Schema in which to find the enum.
:enum
Enum name.
:labels
An array of the enum labels.
:description
A short description of the test.

This function tests that an enum consists of an expected list of labels.The first argument is a schema name, the second an enum name, the third an array of enum labels, and the fourth a description. Example:

SELECT enum_has_labels( 'myschema', 'someenum', ARRAY['foo', 'bar'] );

If you omit the schema, the enum must be visible in the search path. If you omit the test description, it will be set to "Enum :enum should have labels (:labels)".

domain_type_is()

SELECT domain_type_is( :schema, :domain, :type_schema, :type, :description );
SELECT domain_type_is( :schema, :domain, :type_schema, :type );
SELECT domain_type_is( :schema, :domain, :type, :description );
SELECT domain_type_is( :schema, :domain, :type );
SELECT domain_type_is( :domain, :type, :description );
SELECT domain_type_is( :domain, :type );

Parameters

:schema
Schema in which to find the domain.
:domain
Domain name.
:type_schema
Schema in which to find the data type.
:type
Domain data type.
:description
A short description of the test.

Tests the data type underlying a domain. The first two arguments are the schema and name of the domain. The second two are the schema and name of the type that the domain should extend. The fifth argument is a description. If there is no description, a reasonable default description will be created.

The schema arguments are also optional. However, if there is no :schema argument, there cannot be a :type_schema argument, either, though the schema can be included in the type argument, e.g., contrib.citext.

Types can be defined by their canonical names or their aliases, e.g., timestamp with time zone or timestamptz, or character varying or varchar.

For the 3- and 4-argument forms with schemas, cast the schemas to NAME to avoid ambiguities. Example:

SELECT domain_type_is(
    'public'::name, 'us_postal_code',
    'public'::name, 'text'
);

If the data type does not match the type that the domain extends, the test will fail and output diagnostics like so:

# Failed test 631: "Domain public.us_postal_code should extend type public.integer"
#         have: public.text
#         want: public.integer

If the domain in question does not actually exist, the test will fail with diagnostics that tell you so:

# Failed test 632: "Domain public.zip_code should extend type public.text"
#    Domain public.zip_code does not exist

domain_type_isnt()

SELECT domain_type_isnt( :schema, :domain, :type_schema, :type, :description );
SELECT domain_type_isnt( :schema, :domain, :type_schema, :type );
SELECT domain_type_isnt( :schema, :domain, :type, :description );
SELECT domain_type_isnt( :schema, :domain, :type );
SELECT domain_type_isnt( :domain, :type, :description );
SELECT domain_type_isnt( :domain, :type );

Parameters

:schema
Schema in which to find the domain.
:domain
Domain name.
:type_schema
Schema in which to find the data type.
:type
Domain data type.
:description
A short description of the test.

The inverse of domain_type_is(), this function tests that a domain does not extend a particular data type. For example, a US postal code domain should probably extend the text type, not integer, since leading 0s are valid and required. Example:

SELECT domain_type_isnt(
    'public', 'us_postal_code',
    'public', 'integer',
    'The us_postal_code domain should not extend the integer type'
);

The arguments are the same as for domain_type_is().

cast_context_is()

SELECT cast_context_is( :source_type, :target_type, :context, :description );
SELECT cast_context_is( :source_type, :target_type, :context );

Parameters

:source_type
The type cast from.
:target_type
The type cast to.
:context
The context for the cast, one of "implicit", "assignment", or "explicit".

Test that a cast from a source to a target data type has a particular context. Example:

SELECT cast_context_is( 'integer', 'bigint', 'implicit' );

The data types may be defined by their canonical names or their aliases, e.g., character varying or varchar, so both these tests will pass:

SELECT cast_context_is( 'text', 'character varying', 'implicit' );
SELECT cast_context_is( 'text', 'varchar', 'implicit' );

The supported contexts are "implicit", "assignment", and "explicit". You can also just pass in "i", "a", or "e". Consult the PostgreSQL CREATE CAST documentation for the differences between these contexts (hint: they correspond to the default context, AS IMPLICIT, and AS ASSIGNMENT). If you don't supply a test description, pgTAP will create a reasonable one for you.

Test failure will result in useful diagnostics, such as:

# Failed test 124: "Cast ("integer" AS "bigint") context should be explicit"
#         have: implicit
#         want: explicit

If the cast doesn't exist, you'll be told that, too:

# Failed test 199: "Cast ("integer" AS foo) context should be explicit"
#     Cast ("integer" AS foo) does not exist

But you've already used has_cast() to make sure of that, right?

is_superuser()

SELECT is_superuser( :user, :description );
SELECT is_superuser( :user );

Parameters

:user
Name of a PostgreSQL user.
:description
A short description of the test.

Tests that a database user is a super user. If the description is omitted, it will default to "User :user should be a super user". Example:

SELECT is_superuser('theory' ;

If the user does not exist in the database, the diagnostics will say so.

isnt_superuser()

SELECT is_superuser(
    'dr_evil',
    'User "dr_evil" should not be a super user'
);

Parameters

:user
Name of a PostgreSQL user.
:description
A short description of the test.

The inverse of is_superuser(), this function tests that a database user is not a super user. Note that if the named user does not exist in the database, the test is still considered a failure, and the diagnostics will say so.

is_member_of()

SELECT is_member_of( :role, :members, :description );
SELECT is_member_of( :role, :members );
SELECT is_member_of( :role, :member, :description );
SELECT is_member_of( :role, :member );

Parameters

:role
Name of a PostgreSQL group role.
:members
Array of names of roles that should be members of the group role.
:member
Name of a role that should be a member of the group role.
:description
A short description of the test.
SELECT is_member_of( 'sweeties', 'anna' 'Anna should be a sweetie' );
SELECT is_member_of( 'meanies', ARRAY['dr_evil', 'dr_no' ] );

Checks whether a group role contains a member role or all of an array of member roles. If the description is omitted, it will default to "Should have members of role :role." On failure, is_member_of() will output diagnostics listing the missing member roles, like so:

# Failed test 370: "Should have members of role meanies"
#     Members missing from the meanies role:
#         theory
#         agliodbs

If the group role does not exist, the diagnostics will tell you that, instead. But you use has_role() to make sure the role exists before you check its members, don't you? Of course you do.

isnt_member_of()

SELECT isnt_member_of( :role, :members, :description );
SELECT isnt_member_of( :role, :members );
SELECT isnt_member_of( :role, :member, :description );
SELECT isnt_member_of( :role, :member );

Parameters

:role
Name of a PostgreSQL group role.
:members
Array of names of roles that should not be members of the group role.
:member
Name of a role that should not be a member of the group role.
:description
A short description of the test.
SELECT isnt_member_of( 'meanies', 'anna' 'Anna should not be a meanie' );
SELECT isnt_member_of( 'sweeties', ARRAY['dr_evil', 'dr_no' ] );

The inverse of is_member_of(), checks whether a group role does not contain a member role or none of an array of member roles. If the description is omitted, it will default to "Should not have members of role :role." On failure, isnt_member_of() will output diagnostics listing the missing member roles, like so:

# Failed test 371: "Should not have members of role sweeties"
#     Members, who should not be in sweeties role:
#         dr_evil
#         dr_no

If the group role does not exist, the diagnostics will tell you that, instead. But you use has_role() to make sure the role exists before you check its members, don't you? Of course you do.

rule_is_instead()

SELECT rule_is_instead( :schema, :table, :rule, :description );
SELECT rule_is_instead( :schema, :table, :rule );
SELECT rule_is_instead( :table, :rule, :description );
SELECT rule_is_instead( :table, :rule );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of the table to which the rule is applied.
:rule
A rule name.
:description
A short description of the test.

Checks whether a rule on the specified relation is an INSTEAD rule. See the CREATE RULE Documentation for details. If the :schema argument is omitted, the relation must be visible in the search path. If the :description argument is omitted, an appropriate description will be created. An example:

SELECT rule_is_instead('public', 'users', 'on_insert');

In the event that the test fails because the rule in question does not actually exist, you will see an appropriate diagnostic such as:

# Failed test 625: "Rule on_insert on relation public.users should be an INSTEAD rule"
#     Rule on_insert does not exist

rule_is_on()

SELECT rule_is_on( :schema, :table, :rule, :event, :description );
SELECT rule_is_on( :schema, :table, :rule, :event );
SELECT rule_is_on( :table, :rule, :event, :description );
SELECT rule_is_on( :table, :rule, :event );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of the table to which the rule is applied.
:rule
A rule name.
:event
Name of a rule event, one of "SELECT", "INSERT", "UPDATE", or "DELETE".
:description
A short description of the test.

Tests the event for a rule, which may be one of "SELECT", "INSERT", "UPDATE", or "DELETE". For the :event argument, you can specify the name of the event in any case, or even with a single letter ("s", "i", "u", or "d"). If the :schema argument is omitted, then the table must be visible in the search path. If the :description is omitted, a reasonable default will be created. Example:

SELECT rule_is_on('public', 'users', 'on_insert', 'INSERT');

If the test fails, you'll see useful diagnostics, such as:

# Failed test 133: "Rule ins_me should be on INSERT to public.widgets"
#         have: UPDATE
#         want: INSERT

If the rule in question does not exist, you'll be told that, too:

# Failed test 134: "Rule upd_me should be on UPDATE to public.widgets"
#     Rule upd_me does not exist on public.widgets

But then you run has_rule() first, don't you?

Who owns me?

After testing the availability of several objects, we often need to know who owns an object.

db_owner_is ()

SELECT db_owner_is ( :dbname, :user, :description );
SELECT db_owner_is ( :dbname, :user );

Parameters

:dbname
Name of a database.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of the database. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT db_owner_is( 'mydb', 'someuser', 'mydb should be owned by someuser' );
SELECT db_owner_is( current_database(), current_user );

In the event that the test fails because the database in question does not actually exist, you will see an appropriate diagnostic such as:

# Failed test 16: "Database foo should be owned by www"
#     Database foo does not exist

If the test fails because the database is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Database bar should be owned by root"
#         have: postgres
#         want: root

schema_owner_is ()

SELECT schema_owner_is ( :schemaname, :user, :description );
SELECT schema_owner_is ( :schemaname, :user );

Parameters

:schemaname
Name of a schema.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of the schema. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT schema_owner_is( 'myschema', 'someuser', 'myschema should be owned by someuser' );
SELECT schema_owner_is( current_schema(), current_user );

In the event that the test fails because the schema in question does not actually exist, you will see an appropriate diagnostic such as:

# Failed test 16: "Schema foo should be owned by www"
#     Schema foo does not exist

If the test fails because the schema is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Schema bar should be owned by root"
#         have: postgres
#         want: root

tablespace_owner_is ()

SELECT tablespace_owner_is ( :tablespacename, :user, :description );
SELECT tablespace_owner_is ( :tablespacename, :user );

Parameters

:tablespacename
Name of a tablespace.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of the tablespace. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT tablespace_owner_is( 'myts', 'joe', 'Joe has mytablespace' );
SELECT tablespace_owner_is( 'pg_default', current_user );

In the event that the test fails because the tablespace in question does not actually exist, you will see an appropriate diagnostic such as:

# Failed test 16: "Tablespace ssd should be owned by www"
#     Tablespace ssd does not exist

If the test fails because the tablespace is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Tablespace raid_hds should be owned by root"
#         have: postgres
#         want: root

relation_owner_is ()

SELECT relation_owner_is ( :schema, :relation, :user, :description );
SELECT relation_owner_is ( :relation, :user, :description );
SELECT relation_owner_is ( :schema, :relation, :user );
SELECT relation_owner_is ( :relation, :user );

Parameters

:schema
Name of a schema in which find to the :relation.
:relation
Name of a relation.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a relation. Relations are tables, views, materialized views, sequences, composite types, foreign tables, and toast tables. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT relation_owner_is(
    'public', 'mytable', 'someuser',
    'mytable should be owned by someuser'
);
SELECT relation_owner_is( current_schema(), 'mysequence', current_user );

In the event that the test fails because the relation in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Relation foo should be owned by www"
#     Relation foo does not exist

If the test fails because the relation is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Relation bar should be owned by root"
#         have: postgres
#         want: root

table_owner_is ()

SELECT table_owner_is ( :schema, :table, :user, :description );
SELECT table_owner_is ( :table, :user, :description );
SELECT table_owner_is ( :schema, :table, :user );
SELECT table_owner_is ( :table, :user );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a table. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT table_owner_is(
    'public', 'mytable', 'someuser',
    'mytable should be owned by someuser'
);
SELECT table_owner_is( 'widgets', current_user );

Note that this function will not recognize foreign tables; use foreign_table_owner_is() to test for the presence of foreign tables.

In the event that the test fails because the table in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Table foo should be owned by www"
#     Table foo does not exist

If the test fails because the table is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Table bar should be owned by root"
#         have: postgres
#         want: root

view_owner_is ()

SELECT view_owner_is ( :schema, :view, :user, :description );
SELECT view_owner_is ( :view, :user, :description );
SELECT view_owner_is ( :schema, :view, :user );
SELECT view_owner_is ( :view, :user );

Parameters

:schema
Name of a schema in which to find the :view.
:view
Name of a view.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a view. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT view_owner_is(
    'public', 'myview', 'someuser',
    'myview should be owned by someuser'
);
SELECT view_owner_is( 'widgets', current_user );

In the event that the test fails because the view in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "View foo should be owned by www"
#     View foo does not exist

If the test fails because the view is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "View bar should be owned by root"
#         have: postgres
#         want: root

materialized_view_owner_is ()

SELECT materialized_view_owner_is ( :schema, :materialized_view, :user, :description );
SELECT materialized_view_owner_is ( :materialized_view, :user, :description );
SELECT materialized_view_owner_is ( :schema, :materialized_view, :user );
SELECT materialized_view_owner_is ( :materialized_view, :user );

Parameters

:schema
Name of a schema in which to find the :materialized_view.
:materialized_view
Name of a materialized view.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a materialized view. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT view_owner_is(
    'public', 'my_matview', 'someuser',
    'my_matview should be owned by someuser'
);
SELECT materialized_view_owner_is( 'widgets', current_user );

In the event that the test fails because the materialized view in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Materialized view foo should be owned by www"
#     Materialized view foo does not exist

If the test fails because the materialized view is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Materialized view bar should be owned by root"
#         have: postgres
#         want: root

sequence_owner_is ()

SELECT sequence_owner_is ( :schema, :sequence, :user, :description );
SELECT sequence_owner_is ( :sequence, :user, :description );
SELECT sequence_owner_is ( :schema, :sequence, :user );
SELECT sequence_owner_is ( :sequence, :user );

Parameters

:schema
Name of a schema in which to find the :sequence.
:sequence
Name of a sequence.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a sequence. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT sequence_owner_is(
    'public', 'mysequence', 'someuser',
    'mysequence should be owned by someuser'
);
SELECT sequence_owner_is( 'widgets', current_user );

In the event that the test fails because the sequence in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Sequence foo should be owned by www"
#     Sequence foo does not exist

If the test fails because the sequence is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Sequence bar should be owned by root"
#         have: postgres
#         want: root

composite_owner_is ()

SELECT composite_owner_is ( :schema, :composite, :user, :description );
SELECT composite_owner_is ( :composite, :user, :description );
SELECT composite_owner_is ( :schema, :composite, :user );
SELECT composite_owner_is ( :composite, :user );

Parameters

:schema
Name of a schema in which to find the :composite type.
:composite
Name of a composite type.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a composite. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT composite_owner_is(
    'public', 'mycomposite', 'someuser',
    'mycomposite should be owned by someuser'
);
SELECT composite_owner_is( 'widgets', current_user );

In the event that the test fails because the composite in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Composite type foo should be owned by www"
#     Composite type foo does not exist

If the test fails because the composite is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Composite type bar should be owned by root"
#         have: postgres
#         want: root

foreign_table_owner_is ()

SELECT foreign_table_owner_is ( :schema, :foreign_table, :user, :description );
SELECT foreign_table_owner_is ( :foreign_table, :user, :description );
SELECT foreign_table_owner_is ( :schema, :foreign_table, :user );
SELECT foreign_table_owner_is ( :foreign_table, :user );

Parameters

:schema
Name of a schema in which to find the :foreign_table.
:foreign_table
Name of a foreign table.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a foreign table. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT foreign_table_owner_is(
    'public', 'mytable', 'someuser',
    'mytable should be owned by someuser'
);
SELECT foreign_table_owner_is( 'widgets', current_user );

In the event that the test fails because the foreign table in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Foreign table foo should be owned by www"
#     Foreign table foo does not exist

If the test fails because the foreign table is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Foreign table bar should be owned by root"
#         have: postgres
#         want: root

index_owner_is ()

SELECT index_owner_is ( :schema, :table, :index, :user, :description );
SELECT index_owner_is ( :table, :index, :user, :description );
SELECT index_owner_is ( :schema, :table, :index, :user );
SELECT index_owner_is ( :table, :index, :user );

Parameters

:schema
Name of a schema in which to find the :table, :index.
:table
Name of a table.
:table
Name of an index on the table.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of an index. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT index_owner_is(
    'public', 'mytable', 'idx_name', 'someuser',
    'Index "idx_name" on mytable should be owned by someuser'
);
SELECT index_owner_is( 'widgets', 'widgets_pkey', current_user );

In the event that the test fails because the index in question does not actually exist, or the table or schema it's on does not exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Index idx_foo should be owned by root"
#     Index idx_foo on table darfoo not found

If the test fails because the table is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Index idx_foo on table bar should be owned by bob"
#         have: postgres
#         want: bob

function_owner_is ()

SELECT function_owner_is ( :schema, :function, :args, :user, :description );
SELECT function_owner_is ( :function, :args, :user, :description );
SELECT function_owner_is ( :schema, :function, :args, :user );
SELECT function_owner_is ( :function, :args, :user );

Parameters

:schema
Name of a schema in which to find the :function.
:function
Name of a function.
:args
Array of data types of the function arguments.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a function. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT function_owner_is(
    'public', 'frobulate', ARRAY['integer', 'text'], 'someuser',
    'public.frobulate(integer, text) should be owned by someuser'
);
SELECT function_owner_is( 'masticate', ARRAY['text'], current_user );

In the event that the test fails because the function in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Function foo() should be owned by www"
#     Function foo() does not exist

If the test fails because the function is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Function bar() should be owned by root"
#         have: postgres
#         want: root

language_owner_is ()

SELECT language_owner_is ( :languagename, :user, :description );
SELECT language_owner_is ( :languagename, :user );

Parameters

:languagename
Name of a language.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a procedural language. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT language_owner_is( 'plpgsql', 'larry', 'Larry should own plpgsql' );
SELECT language_owner_is( 'plperl', current_user );

In the event that the test fails because the language in question does not actually exist, you will see an appropriate diagnostic such as:

# Failed test 16: "Language pllolcode should be owned by meow"
#     Language pllolcode does not exist

If the test fails because the language is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "Language plruby should be owned by mats"
#         have: postgres
#         want: mats

opclass_owner_is ()

SELECT opclass_owner_is ( :schema, :opclass, :user, :description );
SELECT opclass_owner_is ( :opclass, :user, :description );
SELECT opclass_owner_is ( :schema, :opclass, :user );
SELECT opclass_owner_is ( :opclass, :user );

Parameters

:schema
Name of a schema in which to find the :opclass.
:opclass
Name of an operator class.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of an operator class. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT opclass_owner_is(
    'pg_catalog', 'int4_ops', 'postgres',
    'Operator class int4_ops should be owned by postgres'
);
SELECT opclass_owner_is( 'my_ops', current_user );

In the event that the test fails because the operator class in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "operator class foo should be owned by www"
#     operator class foo does not exist

If the test fails because the operator class is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "operator class bar should be owned by root"
#         have: postgres
#         want: root

type_owner_is ()

SELECT type_owner_is ( :schema, :type, :user, :description );
SELECT type_owner_is ( :type, :user, :description );
SELECT type_owner_is ( :schema, :type, :user );
SELECT type_owner_is ( :type, :user );

Parameters

:schema
Name of a schema in which to find the :type.
:type
Name of a type.
:user
Name of a user.
:description
A short description of the test.

Tests the ownership of a data type. If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT type_owner_is(
    'pg_catalog', 'int4', 'postgres',
    'type int4 should be owned by postgres'
);
SELECT type_owner_is( 'us_postal_code', current_user );

In the event that the test fails because the type in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "type uk_postal_code should be owned by www"
#     type uk_postal_code does not exist

If the test fails because the type is not owned by the specified user, the diagnostics will look something like:

# Failed test 17: "type us_postal_code should be owned by root"
#         have: postgres
#         want: root

Privileged Access

So we know who owns the objects. But what about other roles? Can they access database objects? Let's find out!

database_privs_are()

SELECT database_privs_are ( :db, :role, :privileges, :description );
SELECT database_privs_are ( :db, :role, :privileges );

Parameters

:db
Name of a database.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the database.
:description
A short description of the test.

Tests the privileges granted to a role to access a database. The available database privileges are:

  • CREATE
  • CONNECT
  • TEMPORARY

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT database_privs_are(
    'flipr', 'fred', ARRAY['CONNECT', 'TEMPORARY'],
    'Fred should be granted CONNECT and TERMPORARY on db "flipr"'
);
SELECT database_privs_are( 'dept_corrections', ARRAY['CREATE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted CREATE on database banks"
#     Extra privileges:
#           CONNECT
#           TEMPORARY

Likewise if the role is not granted some of the specified permissions on the database:

# Failed test 15: "Role kurk should be granted CONNECT, TEMPORARY on database banks"
#     Missing privileges:
#           CREATE

In the event that the test fails because the database in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted CONNECT on database maindb"
#     Database maindb does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted CONNECT, CREATE on database widgets"
#     Role slim does not exist

tablespace_privs_are()

SELECT tablespace_privs_are ( :tablespace, :role, :privileges, :description );
SELECT tablespace_privs_are ( :tablespace, :role, :privileges );

Parameters

:tablespace
Name of a tablespace.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the tablespace.
:description
A short description of the test.

Tests the privileges granted to a role to access a tablespace. The available function privileges are:

  • CREATE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT tablespace_privs_are(
    'ssd', 'fred', ARRAY['CREATE'],
    'Fred should be granted CREATE on tablespace "ssd"'
);
SELECT tablespace_privs_are( 'san', ARRAY['CREATE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted no privileges on tablespace hdd"
#     Extra privileges:
#           CREATE

Likewise if the role is not granted some of the specified permissions on the tablespace:

# Failed test 15: "Role kurk should be granted USAGE on ssd"
#     Missing privileges:
#           CREATE

In the event that the test fails because the tablespace in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted CREATE on tablespace tape"
#     Tablespace tape does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted CREATE on san"
#     Role slim does not exist

schema_privs_are()

SELECT schema_privs_are ( :schema, :role, :privileges, :description );
SELECT schema_privs_are ( :schema, :role, :privileges );

Parameters

:schema
Name of a schema.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the schema.
:description
A short description of the test.

Tests the privileges granted to a role to access a schema. The available schema privileges are:

  • CREATE
  • USAGE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT schema_privs_are(
    'flipr', 'fred', ARRAY['CREATE', 'USAGE'],
    'Fred should be granted CREATE and USAGE on schema "flipr"'
);
SELECT schema_privs_are( 'hr', ARRAY['USAGE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted no privileges on schema pinata"
#     Extra privileges:
#           CREATE
#           USAGE

Likewise if the role is not granted some of the specified permissions on the schema:

# Failed test 15: "Role kurk should be granted CREATE, USAGE on schema stuff"
#     Missing privileges:
#           CREATE

In the event that the test fails because the schema in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted USAGE on schema main"
#     Schema main does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted CREATE, USAGE on schema admin"
#     Role slim does not exist

table_privs_are()

SELECT table_privs_are ( :schema, :table, :role, :privileges, :description );
SELECT table_privs_are ( :schema, :table, :role, :privileges );
SELECT table_privs_are ( :table, :role, :privileges, :description );
SELECT table_privs_are ( :table, :role, :privileges );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of a table.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the table.
:description
A short description of the test.

Tests the privileges granted to a role to access a table. The available table privileges are:

  • DELETE
  • INSERT
  • REFERENCES
  • RULE
  • SELECT
  • TRIGGER
  • TRUNCATE
  • UPDATE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT table_privs_are(
    'public', 'frobulate', 'fred', ARRAY['SELECT', 'DELETE'],
    'Fred should be able to select and delete on frobulate'
);
SELECT table_privs_are( 'widgets', 'slim', ARRAY['INSERT', 'UPDATE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted SELECT on widgets"
#     Extra privileges:
#           DELETE
#           INSERT
#           UPDATE

Likewise if the role is not granted some of the specified permissions on the table:

# Failed test 15: "Role kurk should be granted SELECT, INSERT, UPDATE on widgets"
#     Missing privileges:
#           INSERT
#           UPDATE

In the event that the test fails because the table in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted SELECT on widgets"
#     Table widgets does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted SELECT on widgets"
#     Role slim does not exist

sequence_privs_are()

SELECT sequence_privs_are ( :schema, :sequence, :role, :privileges, :description );
SELECT sequence_privs_are ( :schema, :sequence, :role, :privileges );
SELECT sequence_privs_are ( :sequence, :role, :privileges, :description );
SELECT sequence_privs_are ( :sequence, :role, :privileges );

Parameters

:schema
Name of a schema in which to find the sequence.
:sequence
Name of a sequence.
:role
Name of a user or group role.
:privileges
An array of sequence privileges the role should be granted to the sequence.
:description
A short description of the test.

Tests the privileges granted to a role to access a sequence. The available sequence privileges are:

  • SELECT
  • UPDATE
  • USAGE

Note that sequence privileges were added in PostgreSQL 9.0, so this function will likely throw an exception on earlier versions.

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT sequence_privs_are(
    'public', 'seq_ids', 'fred', ARRAY['SELECT', 'UPDATE'],
    'Fred should be able to select and update seq_ids'
);
SELECT sequence_privs_are( 'seq_u', 'slim', ARRAY['USAGE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted SELECT on seq_foo_id"
#     Extra privileges:
#           UPDATE
#           USAGE

Likewise if the role is not granted some of the specified permissions on the sequence:

# Failed test 15: "Role kurk should be granted USAGE on seq_widgets"
#     Missing privileges:
#           SELECT
#           UPDATE

In the event that the test fails because the sequence in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted SELECT on seq_widgets"
#     Sequence widgets does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted SELECT on seq_widgets"
#     Role slim does not exist

any_column_privs_are()

SELECT any_column_privs_are ( :schema, :table, :role, :privileges, :description );
SELECT any_column_privs_are ( :schema, :table, :role, :privileges );
SELECT any_column_privs_are ( :table, :role, :privileges, :description );
SELECT any_column_privs_are ( :table, :role, :privileges );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of a table.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the table.
:description
A short description of the test.

Tests the privileges granted to access one or more of the columns in a table. The available column privileges are:

  • INSERT
  • REFERENCES
  • SELECT
  • UPDATE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT any_column_privs_are(
    'public', 'frobulate', 'fred', ARRAY['SELECT', 'UPDATE'],
    'Fred should be able to select and update columns in frobulate'
);
SELECT any_column_privs_are( 'widgets', 'slim', ARRAY['INSERT', 'UPDATE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted SELECT on columns in widgets"
#     Extra privileges:
#           INSERT
#           UPDATE

Likewise if the role is not granted some of the specified permissions on the table:

# Failed test 15: "Role kurk should be granted SELECT, INSERT, UPDATE on columns in widgets"
#     Missing privileges:
#           INSERT
#           UPDATE

In the event that the test fails because the table in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted SELECT on columns in widgets"
#     Table widgets does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted SELECT on columns in widgets"
#     Role slim does not exist

column_privs_are()

SELECT column_privs_are ( :schema, :table, :column, :role, :privileges, :description );
SELECT column_privs_are ( :schema, :table, :column, :role, :privileges );
SELECT column_privs_are ( :table, :column, :role, :privileges, :description );
SELECT column_privs_are ( :table, :column, :role, :privileges );

Parameters

:schema
Name of a schema in which to find the table.
:table
Name of a table.
:column
Name of a column.
:role
Name of a user or group role.
:privileges
An array of column privileges the role should be granted to the column.
:description
A short description of the test.

Tests the privileges granted to a role to access a single column. The available column privileges are:

  • INSERT
  • REFERENCES
  • SELECT
  • UPDATE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT column_privs_are(
    'public', 'frobulate', 'id', 'fred', ARRAY['SELECT', 'UPDATE'],
    'Fred should be able to select and update frobulate.id'
);
SELECT column_privs_are( 'widgets', 'name', 'slim', ARRAY['INSERT', 'UPDATE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted SELECT on widgets.foo"
#     Extra privileges:
#           INSERT
#           UPDATE

Likewise if the role is not granted some of the specified permissions on the table:

# Failed test 15: "Role kurk should be granted SELECT, INSERT, UPDATE on widgets.foo"
#     Missing privileges:
#           INSERT
#           UPDATE

In the event that the test fails because the table in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted SELECT on widgets.foo"
#     Table widgets does not exist

If the test fails because the column does not actually exist or is not visible, the diagnostics will tell you:

# Failed test 17: "Role slim should be granted SELECT on gadgets.foo"
#     Column gadgets.foo does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 18: "Role slim should be granted SELECT on gadgets.foo"
#     Role slim does not exist

function_privs_are()

SELECT function_privs_are ( :schema, :function, :args, :role, :privileges, :description );
SELECT function_privs_are ( :schema, :function, :args, :role, :privileges );
SELECT function_privs_are ( :function, :args, :role, :privileges, :description );
SELECT function_privs_are ( :function, :args, :role, :privileges );

Parameters

:schema
Name of a schema in which to find the function.
:function
Name of a function.
:args
Array of function arguments.
:role
Name of a user or group role.
:privileges
An array of function privileges the role should be granted to the function.
:description
A short description of the test.

Tests the privileges granted to a role to access a function. The available function privileges are:

  • EXECUTE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT function_privs_are(
    'public', 'frobulate', ARRAY['integer'], 'fred', ARRAY['EXECUTE'],
    'Fred should be able to execute frobulate(int)'
);
SELECT function_privs_are( 'bake', '{}', 'slim', '{}');

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted no privileges on foo()"
#     Extra privileges:
#           EXECUTE

Likewise if the role is not granted some of the specified permissions on the function:

# Failed test 15: "Role kurk should be granted EXECUTE foo()"
#     Missing privileges:
#           EXECUTE

In the event that the test fails because the function in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted EXECUTE on foo(int)"
#     Function foo(int) does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted EXECUTE on foo()"
#     Role slim does not exist

language_privs_are()

SELECT language_privs_are ( :lang, :role, :privileges, :description );
SELECT language_privs_are ( :lang, :role, :privileges );

Parameters

:lang
Name of a language.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the language.
:description
A short description of the test.

Tests the privileges granted to a role to access a language. The available function privileges are:

  • USAGE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT language_privs_are(
    'plpgsql', 'fred', ARRAY['USAGE'],
    'Fred should be granted USAGE on language "flipr"'
);
SELECT language_privs_are( 'plperl', ARRAY['USAGE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted no privileges on banks"
#     Extra privileges:
#           USAGE

Likewise if the role is not granted some of the specified permissions on the language:

# Failed test 15: "Role kurk should be granted USAGE on banks"
#     Missing privileges:
#           USAGE

In the event that the test fails because the language in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted USAGE on plr"
#     Language plr does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted USAGE on pllolcode"
#     Role slim does not exist

fdw_privs_are()

SELECT fdw_privs_are ( :fdw, :role, :privileges, :description );
SELECT fdw_privs_are ( :fdw, :role, :privileges );

Parameters

:fdw
Name of a foreign data wrapper.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the foreign data wrapper.
:description
A short description of the test.

Tests the privileges granted to a role to access a foreign data wrapper. The available function privileges are:

  • USAGE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT fdw_privs_are(
    'oracle', 'fred', ARRAY['USAGE'],
    'Fred should be granted USAGE on fdw "oracle"'
);
SELECT fdw_privs_are( 'log_csv', ARRAY['USAGE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted no privileges on odbc"
#     Extra privileges:
#           USAGE

Likewise if the role is not granted some of the specified permissions on the FDW:

# Failed test 15: "Role kurk should be granted USAGE on odbc"
#     Missing privileges:
#           USAGE

In the event that the test fails because the FDW in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted USAGE on FDW sqlite"
#     FDW sqlite does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted USAGE on sqlite"
#     Role slim does not exist

server_privs_are()

SELECT server_privs_are ( :server, :role, :privileges, :description );
SELECT server_privs_are ( :server, :role, :privileges );

Parameters

:server
Name of a server.
:role
Name of a user or group role.
:privileges
An array of table privileges the role should be granted to the server.
:description
A short description of the test.

Tests the privileges granted to a role to access a server. The available function privileges are:

  • USAGE

If the :description argument is omitted, an appropriate description will be created. Examples:

SELECT server_privs_are(
    'otherdb', 'fred', ARRAY['USAGE'],
    'Fred should be granted USAGE on server "otherdb"'
);
SELECT server_privs_are( 'myserv', ARRAY['USAGE'] );

If the role is granted permissions other than those specified, the diagnostics will list the extra permissions, like so:

# Failed test 14: "Role bob should be granted no privileges on myserv"
#     Extra privileges:
#           USAGE

Likewise if the role is not granted some of the specified permissions on the server:

# Failed test 15: "Role kurk should be granted USAGE on oltp"
#     Missing privileges:
#           USAGE

In the event that the test fails because the server in question does not actually exist or is not visible, you will see an appropriate diagnostic such as:

# Failed test 16: "Role slim should be granted USAGE on server oltp"
#     server oltp does not exist

If the test fails because the role does not exist, the diagnostics will look something like:

# Failed test 17: "Role slim should be granted USAGE on oltp"
#     Role slim does not exist

policies_are()

SELECT policies_are( :schema, :table, :policies, :description );
SELECT policies_are( :schema, :table, :policies );
SELECT policies_are( :table,  :policies, :description );
SELECT policies_are( :table,  :policies );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table in which to find policies.
:policies
An array of policy names.
:description
A short description of the test.

This function tests that all of the policies on the named table are only the policies that should be on that table. If the :schema argument is omitted, the table must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT policies_are(
    'myschema',
    'atable',
    ARRAY[ 'atable_policy_one', 'atable_policy_two' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing policies, like so:

# Failed test 13: "Table myschema.atable should have the correct policies"
#     Extra policies:
#         policy_for_atable
#     Missing policies:
#         atable_policy_two

policy_roles_are()

SELECT policy_roles_are( :schema, :table, :policy, :roles, :description );
SELECT policy_roles_are( :schema, :table, :policy, :roles );
SELECT policy_roles_are( :table, :policy,  :roles, :description );
SELECT policy_roles_are( :table, :policy,  :roles );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table to which :policy applies.
:policy
Name of a policy.
:roles
An array of role names to which :policy is applied.
:description
A short description of the test.

This function tests whether the roles to which policy applies are only the roles that should be on that policy. If the :schema argument is omitted, the table must be visible in the search path, excluding pg_catalog and information_schema. If the description is omitted, a generally useful default description will be generated. Example:

SELECT policy_roles_are(
    'myschema',
    'atable',
    'apolicy'
    ARRAY[ 'atable_apolicy_role_one', 'atable_apolicy_role_two' ]
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing policy roles, like so:

# Failed test 13: "Policy apolicy for table myschema.atable should have the correct roles"
#     Extra policy roles:
#         arole_one
#     Missing policy roles:
#         atable_apolicy_role_one

policy_cmd_is()

SELECT policy_cmd_is( :schema, :table, :policy, :command, :description );
SELECT policy_cmd_is( :schema, :table, :policy, :command );
SELECT policy_cmd_is( :table, :policy,  :command, :description );
SELECT policy_cmd_is( :table, :policy,  :command );

Parameters

:schema
Name of a schema in which to find the :table.
:table
Name of a table to which :policy applies.
:policy
Name of a policy.
:command
The command type to which the :policy is applied.
:description
A short description of the test.

This function tests whether the command to which policy applies is same as command that is given in function arguments.

The available policy :command types are:

  • SELECT
  • INSERT
  • UPDATE
  • DELETE
  • ALL

If the :schema argument is omitted, the table must be visible in the search path, excluding pg_catalog and information_schema. If the :description is omitted (but :schema is present, be sure to cast :policy to name), a generally useful default description will be generated. Example:

SELECT policy_cmd_is(
    'myschema',
    'atable',
    'apolicy'::NAME
    'all'
);

In the event of a failure, you'll see diagnostics listing the extra and/or missing policy command, like so:

# Failed test 13: "Policy apolicy for table myschema.atable should apply to ALL command"
#         have: INSERT
#         want: ALL

No Test for the Wicked

There is more to pgTAP. Oh so much more! You can output your own diagnostics. You can write conditional tests based on the output of utility functions. You can batch up tests in functions. Read on to learn all about it.

Diagnostics

If you pick the right test function, you'll usually get a good idea of what went wrong when it failed. But sometimes it doesn't work out that way. So here we have ways for you to write your own diagnostic messages which are safer than just \echo or SELECT foo.

diag()

SELECT diag( :lines );

Parameters

:lines
A list of one or more SQL values of the same type.

Returns a diagnostic message which is guaranteed not to interfere with test output. Handy for this sort of thing:

-- Output a diagnostic message if the collation is not en_US.UTF-8.
SELECT diag(
     E'These tests expect LC_COLLATE to be en_US.UTF-8,\n',
     'but yours is set to ', setting, E'.\n',
     'As a result, some tests may fail. YMMV.'
)
  FROM pg_settings
 WHERE name = 'lc_collate'
   AND setting <> 'en_US.UTF-8';

Which would produce:

# These tests expect LC_COLLATE to be en_US.UTF-8,
# but yours is set to en_US.ISO8859-1.
# As a result, some tests may fail. YMMV.

You can pass data of any type to diag() and it will all be converted to text for the diagnostics. You can also pass any number of arguments (as long as they are all the same data type) and they will be concatenated together.

Conditional Tests

Sometimes running a test under certain conditions will cause the test script or function to die. A certain function or feature isn't implemented (such as sha256() prior to PostgreSQL 11), some resource isn't available (like a procedural language), or a contrib module isn't available. In these cases it's necessary to skip tests, or declare that they are supposed to fail but will work in the future (a todo test).

skip()

SELECT skip( :why, :how_many );
SELECT skip( :how_many, :why );
SELECT skip( :why );
SELECT skip( :how_many );

Parameters

:why
Reason for skipping the tests.
:how_many
Number of tests to skip

Outputs SKIP test results. Use it in a conditional expression within a SELECT statement to replace the output of a test that you otherwise would have run.

SELECT CASE WHEN pg_version_num() < 80300
    THEN skip('has_enum() not supported before 8.3', 2 )
    ELSE collect_tap(
        has_enum( 'bug_status' ),
        has_enum( 'bug_status', 'mydesc' )
    ) END;

Note how use of the conditional CASE statement has been used to determine whether or not to run a couple of tests. If they are to be run, they are run through collect_tap(), so that we can run a few tests in the same query. If we don't want to run them, we call skip() and tell it how many tests we're skipping.

If you don't specify how many tests to skip, skip() will assume that you're skipping only one. This is useful for the simple case, of course:

SELECT CASE current_schema()
    WHEN 'public' THEN is( :this, :that )
    ELSE skip( 'Tests not running in the "public" schema' )
    END;

But you can also use it in a SELECT statement that would otherwise return multiple rows:

SELECT CASE current_schema()
    WHEN 'public' THEN is( nspname, 'public' )
    ELSE skip( 'Cannot see the public schema' )
    END
  FROM pg_namespace;

This will cause it to skip the same number of rows as would have been tested had the WHEN condition been true.

todo()

SELECT todo( :why, :how_many );
SELECT todo( :how_many, :why );
SELECT todo( :why );
SELECT todo( :how_many );

Parameters

:why
Reason for marking tests as to dos.
:how_many
Number of tests to mark as to dos.

Declares a series of tests that you expect to fail and why. Perhaps it's because you haven't fixed a bug or haven't finished a new feature:

SELECT todo('URIGeller not finished', 2);

\set card '\'Eight of clubs\''
SELECT is( URIGeller.yourCard(), :card, 'Is THIS your card?' );
SELECT is( URIGeller.bendSpoon(), 'bent', 'Spoon bending, how original' );

With todo(), :how_many specifies how many tests are expected to fail. If :how_many is omitted, it defaults to 1. pgTAP will run the tests normally, but print out special flags indicating they are "todo" tests. The test harness will interpret these failures as ok. Should any todo test pass, the harness will report it as an unexpected success. You then know that the thing you had todo is done and can remove the call to todo().

The nice part about todo tests, as opposed to simply commenting out a block of tests, is that they're like a programmatic todo list. You know how much work is left to be done, you're aware of what bugs there are, and you'll know immediately when they're fixed.

todo_start( why )

todo_start( )

This function allows you declare all subsequent tests as TODO tests, up until the todo_end() function is called.

The todo() syntax is generally pretty good about figuring out whether or not we're in a TODO test. However, often we find it difficult to specify the number of tests that are TODO tests. Thus, you can instead use todo_start() and todo_end() to more easily define the scope of your TODO tests.

Note that you can nest TODO tests, too:

SELECT todo_start('working on this');
-- lots of code
SELECT todo_start('working on that');
-- more code
SELECT todo_end();
SELECT todo_end();

This is generally not recommended, but large testing systems often have weird internal needs.

The todo_start() and todo_end() function should also work with the todo() function, although it's not guaranteed and its use is also discouraged:

SELECT todo_start('working on this');
-- lots of code
SELECT todo('working on that', 2);
-- Two tests for which the above line applies
-- Followed by more tests scoped till the following line.
SELECT todo_end();

We recommend that you pick one style or another of TODO to be on the safe side.

todo_end()

Stops running tests as TODO tests. This function is fatal if called without a preceding todo_start() method call.

in_todo()

Returns true if the test is currently inside a TODO block.

Utility Functions

Along with the usual array of testing, planning, and diagnostic functions, pTAP provides a few extra functions to make the work of testing more pleasant.

pgtap_version()

SELECT pgtap_version();

Returns the version of pgTAP installed in the server. The value is NUMERIC, and thus suitable for comparing to a decimal value:

SELECT CASE WHEN pgtap_version() < 0.17
    THEN skip('No sequence assertions before pgTAP 0.17')
    ELSE has_sequence('my_big_seq')
    END;

pg_version()

SELECT pg_version();

Returns the server version number against which pgTAP was compiled. This is the stringified version number displayed in the first part of the core version() function and stored in the "server_version" setting:

try=% select current_setting( 'server_version'), pg_version();
 current_setting | pg_version
-----------------+------------
 12.2            | 12.2
(1 row)

pg_version_num()

SELECT pg_version_num();

Returns an integer representation of the server version number against which pgTAP was compiled. This function is useful for determining whether or not certain tests should be run or skipped (using skip()) depending on the version of PostgreSQL. For example:

SELECT CASE WHEN pg_version_num() < 80300
    THEN skip('has_enum() not supported before 8.3' )
    ELSE has_enum( 'bug_status', 'mydesc' )
    END;

The revision level is in the tens position, the minor version in the thousands position, and the major version in the ten thousands position and above (assuming PostgreSQL 10 is ever released, it will be in the hundred thousands position). This value is the same as the server_version_num setting.

os_name()

SELECT os_name();

Returns a string representing the name of the operating system on which pgTAP was compiled. This can be useful for determining whether or not to skip tests on certain operating systems.

This is usually the same a the output of uname, but converted to lower case. There are some semantics in the pgTAP build process to detect other operating systems, though assistance in improving such detection would be greatly appreciated.

NOTE: The values returned by this function may change in the future, depending on how good the pgTAP build process gets at detecting a OS.

collect_tap()

SELECT collect_tap(:lines);

Parameters

:lines
A list of one or more lines of TAP.

Collects the results of one or more pgTAP tests and returns them all. Useful when used in combination with skip():

  SELECT CASE os_name() WHEN 'darwin' THEN
      collect_tap(
          cmp_ok( 'Bjørn'::text, '>', 'Bjorn', 'ø > o' ),
          cmp_ok( 'Pınar'::text, '>', 'Pinar', 'ı > i' ),
          cmp_ok( 'José'::text,  '>', 'Jose',  'é > e' ),
          cmp_ok( 'Täp'::text,   '>', 'Tap',   'ä > a' )
      )
  ELSE
       skip('Collation-specific test', 4)
  END;

display_oper()

SELECT display_oper( :opername, :operoid );

Parameters

:opername
Operator name.
:operoid
Operator OID.

Similar to casting an operator OID to regoperator, only the schema is not included in the display. For example:

SELECT display_oper(oprname, oid ) FROM pg_operator;

Used internally by pgTAP to compare operators, but may be more generally useful.

format_type_string()

SELECT format_type_string( :text );

Parameters

:text
An SQL type declaration, optionally schema-qualified.

This function normalizes data type declarations for accurate comparison to table columns by col_type_is(). It's effectively the identical to the calling format_type() with the type OID and type modifier that define the column, but returns a NULL on an invalid or missing type, rather than raising an error. Types can be defined by their canonical names or their aliases, e.g., character varying or varchar. The exception is interval types prior to Postgres 17, which must be specified exactly as Postgres renders them internally, e.g., 'interval(0), interval second(0), or interval day to second(4).

try=# SELECT format_type_string('timestamp(3)');
    format_type_string
--------------------------------
timestamp(3) without time zone

findfuncs()

SELECT findfuncs( :schema, :pattern, :exclude_pattern );
SELECT findfuncs( :schema, :pattern );
SELECT findfuncs( :pattern, :exclude_pattern );
SELECT findfuncs( :pattern );

Parameters

:schema
Schema to search for functions.
:pattern
Regular expression pattern against which to match function names.
:pattern
Regular expression pattern to exclude functions with matching names.

This function searches the named schema or, if no schema is passed, the search patch, for all functions that match the regular expression pattern. The optional exclude regular expression pattern can be used to prevent matchin startup/setup/teardown/shutdown functions.

The functions it finds are returned as an array of text values, with each value consisting of the schema name, a dot, and the function name. For example:

SELECT findfuncs('tests', '^test);
            findfuncs
-----------------------------------
 {tests.test_foo,tests."test bar"}
(1 row)

Tap that Batch

Sometimes it can be useful to batch a lot of TAP tests into a function. The simplest way to do so is to define a function that RETURNS SETOF TEXT and then simply call RETURN NEXT for each TAP test. Here's a simple example:

CREATE OR REPLACE FUNCTION my_tests(
) RETURNS SETOF TEXT AS $$
BEGIN
    RETURN NEXT pass( 'plpgsql simple' );
    RETURN NEXT pass( 'plpgsql simple 2' );
END;
$$ LANGUAGE plpgsql;

Then you can just call the function to run all of your TAP tests at once:

SELECT plan(2);
SELECT * FROM my_tests();
SELECT * FROM finish();

do_tap()

SELECT do_tap( :schema, :pattern );
SELECT do_tap( :schema );
SELECT do_tap( :pattern );
SELECT do_tap();

Parameters

:schema
Name of a schema containing pgTAP test functions.
:pattern
Regular expression pattern against which to match function names.

If you like you can create a whole slew of these batched tap functions, and then use the do_tap() function to run them all at once. If passed no arguments, it will attempt to find all visible functions that start with "test". If passed a schema name, it will look for and run test functions only in that schema (be sure to cast the schema to name if it is the only argument). If passed a regular expression pattern, it will look for function names that match that pattern in the search path. If passed both, it will of course only search for test functions that match the function in the named schema.

This can be very useful if you prefer to keep all of your TAP tests in functions defined in the database. Simply call plan(), use do_tap() to execute all of your tests, and then call finish(). A dead simple example:

SELECT plan(32);
SELECT * FROM do_tap('testschema'::name);
SELECT * FROM finish();

As a bonus, if client_min_messages is set to "warning", "error", "fatal", or "panic", the name of each function will be emitted as a diagnostic message before it is called. For example, if do_tap() found and executed two TAP testing functions an client_min_messages is set to "warning", output will look something like this:

# public.test_this()
ok 1 - simple pass
ok 2 - another simple pass
# public.test_that()
ok 3 - that simple
ok 4 - that simple 2

Which will make it much easier to tell what functions need to be examined for failing tests.

runtests()

SELECT runtests( :schema, :pattern );
SELECT runtests( :schema );
SELECT runtests( :pattern );
SELECT runtests( );

Parameters

:schema
Name of a schema containing pgTAP test functions.
:pattern
Regular expression pattern against which to match function names.

If you'd like pgTAP to plan, run all of your test functions, and finish, all in one fell swoop, use runtests(). This most closely emulates the xUnit testing environment, similar to the functionality of PGUnit. Example:

SELECT * FROM runtests( 'testschema', '^test' );

As with do_tap(), you can pass in a schema argument and/or a pattern that the names of the tests functions can match. If you pass in only the schema argument, be sure to cast it to name to identify it as a schema name rather than a pattern:

SELECT * FROM runtests('testschema'::name);

Unlike do_tap(), runtests() fully supports startup, shutdown, setup, and teardown functions, as well as transactional rollbacks between tests. It also outputs the test plan, executes each test function as a TAP subtest, and finishes the tests, so you don't have to call plan() or finish() yourself. The output, assuming a single startup test, two subtests, and a single shutdown test, will look something like this:

ok 1 - Startup test
# Subtest: public.test_this()
    ok 1 - simple pass
    ok 2 - another simple pass
ok 2 - public.test_this()
# Subtest: public.test_that()
    ok 1 - that simple
    ok 2 - that simple 2
ok 3 - public.test_that()
ok 4 - Shutdown test
1..4

The fixture functions run by runtests() are as follows:

  • ^startup - Functions whose names start with "startup" are run in alphabetical order before any test functions are run.
  • ^setup - Functions whose names start with "setup" are run in alphabetical order before each test function is run.
  • ^teardown - Functions whose names start with "teardown" are run in alphabetical order after each test function is run. They will not be run, however, after a test that has died.
  • ^shutdown - Functions whose names start with "shutdown" are run in alphabetical order after all test functions have been run.

Note that all tests executed by runtests() are run within a single transaction, and each test is run in a subtransaction that also includes execution all the setup and teardown functions. All transactions are rolled back after each test function, and at the end of testing, leaving your database in largely the same condition as it was in when you started it (the one exception I'm aware of being sequences, which are not rolled back to the value used at the beginning of a rolled-back transaction).

Secrets of the pgTAP Mavens

Over the years, a number of techniques have evolved to make all of our pgTAP testing lives easier. Here are some of them.

Relational-style Loops

Need to test a bunch of objects and find yourself looking for some kind of for loop to DRY off with? SQL doesn't have one, of course, but that's because it doesn't need one: the whole language is built around doing things to a bunch of rows. So take advantage of it: build relations with the VALUES command! For example, to make sure you have a table in a defined list of schemas, try something like this:

SELECT has_table(sch, 'widgets', format('Has %I.widgets', sch)) FROM (VALUES('amazon'), ('starbucks'), ('boeing')) F(sch);

Note the use of the format function to make a nice test description, too. Here's a more complicated example that uses a cross join to test that various columns are NOT NULL in a specific table in a bunch of schemas:

SELECT col_not_null(sch, 'table1', col)
FROM (VALUES('schema1'), ('schema1')) AS stmp (sch)
CROSS JOIN (VALUES('col_pk'), ('col2'), ('col3')) AS ctmp (col);

Compose Yourself

So, you've been using pgTAP for a while, and now you want to write your own test functions. Go ahead; I don't mind. In fact, I encourage it. How? Why, by providing a function you can use to test your tests, of course!

But first, a brief primer on writing your own test functions. There isn't much to it, really. Just write your function to do whatever comparison you want. As long as you have a boolean value indicating whether or not the test passed, you're golden. Just then use ok() to ensure that everything is tracked appropriately by a test script.

For example, say that you wanted to create a function to ensure that two text values always compare case-insensitively. Sure you could do this with is() and the LOWER() function, but if you're doing this all the time, you might want to simplify things. Here's how to go about it:

CREATE OR REPLACE FUNCTION lc_is (text, text, text)
RETURNS TEXT AS $$
DECLARE
    result BOOLEAN;
BEGIN
    result := LOWER($1) = LOWER($2);
    RETURN ok( result, $3 ) || CASE WHEN result THEN '' ELSE E'\n' || diag(
           '    Have: ' || $1 ||
        E'\n    Want: ' || $2;
) END;
END;
$$ LANGUAGE plpgsql;

Yep, that's it. The key is to always use pgTAP's ok() function to guarantee that the output is properly formatted, uses the next number in the sequence, and the results are properly recorded in the database for summarization at the end of the test script. You can also provide diagnostics as appropriate; just append them to the output of ok() as we've done here.

Of course, you don't have to directly use ok(); you can also use another pgTAP function that ultimately calls ok(). IOW, while the above example is instructive, this version is easier on the eyes:

CREATE OR REPLACE FUNCTION lc_is ( TEXT, TEXT, TEXT )
RETURNS TEXT AS $$
     SELECT is( LOWER($1), LOWER($2), $3);
$$ LANGUAGE sql;

But either way, let pgTAP handle recording the test results and formatting the output.

Testing Test Functions

Now you've written your test function. So how do you test it? Why, with this handy-dandy test function!

check_test()

SELECT check_test( :test_output, :is_ok, :name, :want_description, :want_diag, :match_diag );
SELECT check_test( :test_output, :is_ok, :name, :want_description, :want_diag );
SELECT check_test( :test_output, :is_ok, :name, :want_description );
SELECT check_test( :test_output, :is_ok, :name );
SELECT check_test( :test_output, :is_ok );

Parameters

:test_output
The output from your test. Usually it's just returned by a call to the test function itself. Required.
:is_ok
Boolean indicating whether or not the test is expected to pass. Required.
:name
A brief name for your test, to make it easier to find failures in your test script. Optional.
:want_description
Expected test description to be output by the test. Optional. Use an empty string to test that no description is output.
:want_diag
Expected diagnostic message output during the execution of a test. Must always follow whatever is output by the call to ok(). Optional. Use an empty string to test that no description is output.
:match_diag
Use matches() to compare the diagnostics rather than :is(). Useful for those situations where you're not sure what will be in the output, but you can match it with a regular expression.

This function runs anywhere between one and three tests against a test function. At its simplest, you just pass in the output of your test function (and it must be one and only one test function's output, or you'll screw up the count, so don't do that!) and a boolean value indicating whether or not you expect the test to have passed. That looks something like this:

SELECT * FROM check_test(
    lc_eq('This', 'THIS', 'eq'),
    true
);

All other arguments are optional, but I recommend that you always include a short test name to make it easier to track down failures in your test script. check_test() uses this name to construct descriptions of all of the tests it runs. For example, without a short name, the above example will yield output like so:

not ok 14 - Test should pass

Yeah, but which test? So give it a very succinct name and you'll know what test. If you have a lot of these, it won't be much help. So give each call to check_test() a name:

SELECT * FROM check_test(
    lc_eq('This', 'THIS', 'eq'),
    true,
    'Simple lc_eq test',
);

Then you'll get output more like this:

not ok 14 - Simple lc_test should pass

Which will make it much easier to find the failing test in your test script.

The optional fourth argument is the description you expect to be output. This is especially important if your test function generates a description when none is passed to it. You want to make sure that your function generates the test description you think it should! This will cause a second test to be run on your test function. So for something like this:

SELECT * FROM check_test(
    lc_eq( ''this'', ''THIS'' ),
    true,
    'lc_eq() test',
    'this is THIS'
);

The output then would look something like this, assuming that the lc_eq() function generated the proper description (the above example does not):

ok 42 - lc_eq() test should pass
ok 43 - lc_eq() test should have the proper description

See how there are two tests run for a single call to check_test()? Be sure to adjust your plan accordingly. Also note how the test name was used in the descriptions for both tests.

If the test had failed, it would output a nice diagnostics. Internally it just uses is() to compare the strings:

# Failed test 43:  "lc_eq() test should have the proper description"
#         have: 'this is this'
#         want: 'this is THIS'

The fifth argument, :want_diag, which is also optional, compares the diagnostics generated during the test to an expected string. Such diagnostics must follow whatever is output by the call to ok() in your test. Your test function should not call diag() until after it calls ok() or things will get truly funky.

Assuming you've followed that rule in your lc_eq() test function, see what happens when a lc_eq() fails. Write your test to test the diagnostics like so:

SELECT * FROM check_test(
    lc_eq( ''this'', ''THat'' ),
    false,
    'lc_eq() failing test',
    'this is THat',
    E'    Want: this\n    Have: THat
);

This of course triggers a third test to run. The output will look like so:

ok 44 - lc_eq() failing test should fail
ok 45 - lc_eq() failing test should have the proper description
ok 46 - lc_eq() failing test should have the proper diagnostics

And of course, it the diagnostic test fails, it will output diagnostics just like a description failure would, something like this:

# Failed test 46:  "lc_eq() failing test should have the proper diagnostics"
#         have:     Have: this
#     Want: that
#         want:     Have: this
#     Want: THat

If you pass in the optional sixth argument, :match_diag, the :want_diag argument will be compared to the actual diagnostic output using matches() instead of is(). This allows you to use a regular expression in the :want_diag argument to match the output, for those situations where some part of the output might vary, such as time-based diagnostics.

I realize that all of this can be a bit confusing, given the various haves and wants, but it gets the job done. Of course, if your diagnostics use something other than indented "have" and "want", such failures will be easier to read. But either way, do test your diagnostics!

Compatibility

Here are some notes on how pgTAP is built for particular versions of PostgreSQL. This helps you to understand any side-effects. To see the specifics for each version of PostgreSQL, consult the files in the compat/ directory in the pgTAP distribution.

11 and Up

No changes. Everything should just work.

10 and Down

  • The stored procedure-testing funtions are not available, because stored procedures were not introduced until 11.

9.6 and Down

  • The partition-testing functions are not available, because partitions were not introduced until 10.

9.4 and Down

  • lives_ok() and throws_ok() will not trap ASSERT_FAILURE, since asserts do not exist prior to 9.5.

9.2 and Down

  • Lacks full automated testing. Recommend using 9.4 or higher.
  • Diagnostic output from lives_ok() and xUnit function exceptions will not include schema, table, column, data type, or constraint information, since such diagnostics were not introduced until 9.3.

9.1 and Down

  • Lacks full automated testing. Recommend using 9.4 or higher.
  • Diagnostic output from lives_ok() and xUnit function exceptions will not error context or details, since such diagnostics were not introduced until 9.2.

9.0 and Down

No longer supported.

Metadata

Public Repository

The source code for pgTAP is available on GitHub. Please feel free to fork and contribute!

Mail List

Join the pgTAP community by subscribing to the pgtap-users mail list. All questions, comments, suggestions, and bug reports are welcomed there.

Author

David E. Wheeler

Credits

  • Michael Schwern and chromatic for Test::More.
  • Adrian Howard for Test::Exception.

Copyright and License

Copyright (c) 2008-2023 David E. Wheeler. Some rights reserved.

Permission to use, copy, modify, and distribute this software and its documentation for any purpose, without fee, and without a written agreement is hereby granted, provided that the above copyright notice and this paragraph and the following two paragraphs appear in all copies.

IN NO EVENT SHALL DAVID E. WHEELER BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, ARISING OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF DAVID E. WHEELER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

DAVID E. WHEELER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS ON AN "AS IS" BASIS, AND DAVID E. WHEELER HAS NO OBLIGATIONS TO PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.